Extension Cord & Power Tool Inspection - FREE PDF

Inspect extension cords and power tools before use.

  • Industry: Construction
  • Frequency: Daily / Before use
  • Estimated Time: 10-15 minutes
  • Role: Worker / Supervisor
  • Total Items: 33
  • Compliance: OSHA 1926.404, OSHA 1926.302

Pre-Task Verification

Verify conditions before work begins.

  • Required permits obtained?
  • Hazards identified and communicated?
  • Required PPE available and worn?

Safety Inspection Items

Inspect per OSHA 1926.404 requirements.

  • Equipment/tools in safe condition?
  • Work area safe and organized?
  • Fall protection in place?
  • Barricades and signage adequate?

Regulatory Compliance

Verify OSHA and regulatory compliance.

  • OSHA requirements met?
  • Worker training current?
  • Documentation complete?

Findings & Corrective Actions

Document deficiencies and required actions.

  • Inspection Result
  • Deficiencies Found
  • Corrective Actions
  • Competent Person Signature

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

  • Inspector Name
  • Inspection Date
  • Project Name / Job Number
  • Current Weather Conditions
  • Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

  • Site safety plan posted and accessible?
  • All required permits current and displayed?
  • SDS/MSDS sheets available for all chemicals on site?
  • First aid supplies accessible and stocked?
  • Emergency contact information posted?

Personal Protective Equipment (PPE)

Verify all personnel have and are using appropriate PPE

  • Hard hats worn by all personnel?
  • Safety glasses/eye protection in use?
  • High-visibility vests worn where required?
  • Steel-toe/safety footwear worn?
  • PPE in good condition (no damage)?

Site Conditions & Housekeeping

General site conditions and housekeeping standards

  • Walkways and access routes clear of debris?
  • Adequate lighting in all work areas?
  • Trip hazards identified and addressed?
  • Waste properly contained and removed?

Related Construction Checklists

Related Electrical Checklists

Why Use This Extension Cord & Power Tool Inspection?

This extension cord & power tool inspection helps construction teams maintain compliance and operational excellence. Designed for worker / supervisor professionals, this checklist covers 33 critical inspection points across 8 sections. Recommended frequency: daily / before use.

Ensures compliance with OSHA 1926.404, OSHA 1926.302. Regulatory-aligned for audit readiness and inspection documentation.

Frequently Asked Questions

What does the Extension Cord & Power Tool Inspection cover?

This checklist covers 33 inspection items across 8 sections: Pre-Task Verification, Safety Inspection Items, Regulatory Compliance, Findings & Corrective Actions, Pre-Inspection Setup & Documentation, Safety & Compliance Verification, Personal Protective Equipment (PPE), Site Conditions & Housekeeping. It is designed for construction operations and compliance.

How often should this checklist be completed?

This checklist should be completed daily / before use. Each completion takes approximately 10-15 minutes.

Who should use this Extension Cord & Power Tool Inspection?

This checklist is designed for Worker / Supervisor professionals in the construction industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.

Can I download this checklist as a PDF?

Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.

Browse More Checklists