UK LOLER Lifting Equipment Inspection Checklist
Comprehensive UK LOLER lifting equipment inspection checklist.
- Industry: Construction
- Frequency: 6 monthly/12 monthly
- Estimated Time: 30-45 minutes
- Role: Competent Person
- Total Items: 20
- Compliance: LOLER 1998, HSE L113, PUWER 1998
Identification
Equipment identification
- SWL marking legible?
- Serial number visible?
Structural Condition
Physical condition
- No cracks or damage?
- No excessive corrosion?
- No distortion?
Safety Devices
Safety mechanisms
- Limit switches functional?
- Overload device functional?
- Brakes effective?
Lifting Accessories
Chains, slings, etc.
- No excessive wear?
- Hooks with safety catches?
PPE Compliance Verification
Personal protective equipment inspection
- Hard hats worn in required areas?
- Safety glasses/goggles worn as required?
- High-visibility vests worn?
- Steel-toe boots worn by all workers?
Fall Protection & Working at Heights
OSHA 1926 Subpart M fall protection
- Fall protection used above 6 feet?
- Guardrails intact and properly installed?
- Harnesses inspected before use?
Housekeeping & Site Organization
Worksite cleanliness and organization
- Walkways and access routes clear?
- Materials stored safely and secured?
- Debris and waste removed regularly?
Related Construction Checklists
- UK Tower Crane Inspection Checklist
- UK Tower Crane Inspection Checklist
- UK CDM Construction Site Inspection Checklist
- UK RIDDOR Incident Investigation Checklist
- UK HSE General Risk Assessment Checklist
- UK Confined Space Entry Permit Checklist