Wound VAC/NPWT Management Checklist

Comprehensive negative pressure wound therapy management including dressing changes, pressure verification, and wound assessment.

  • Industry: Healthcare
  • Frequency: Per dressing change
  • Estimated Time: 30-45 minutes
  • Role: Wound Care Nurse
  • Total Items: 32
  • Compliance: WOCN Guidelines, Manufacturer Instructions, Hospital Wound Care Policy

Preparation

Pre-procedure preparation

  • Physician order verified?
  • All supplies gathered?
  • Pain management addressed?
  • Sterile field prepared?

Wound Assessment

Evaluate wound bed

  • Wound dimensions measured (L x W x D)?
  • Wound bed tissue type documented?
  • Drainage amount and type documented?
  • Periwound skin assessed?
  • Undermining/tunneling assessed?

Dressing Application

Apply NPWT dressing

  • Wound cleaned appropriately?
  • Foam cut to fit wound?
  • Drape applied and sealed?
  • Tubing connected properly?
  • Adequate seal achieved?

Device Settings

VAC unit verification

  • Pressure set per order?
  • Therapy mode correct (continuous/intermittent)?
  • Therapy activated and running?
  • No air leaks detected?

Pre-Assessment Information

Initial assessment documentation and patient/facility identification

  • Assessor Name / Credentials
  • Assessment Date
  • Department / Unit
  • Assessment Type (Routine/Annual/Complaint)
  • Previous assessment findings reviewed?

Infection Prevention & Control

Verify infection control practices per CDC and Joint Commission standards

  • Hand hygiene compliance observed?
  • Appropriate PPE available and properly used?
  • Isolation precautions properly implemented?
  • Sharps containers available and not overfilled?
  • High-touch surfaces properly disinfected?

Patient Safety & Identification

Verify patient safety protocols and identification procedures

  • Two patient identifiers used before procedures?
  • Fall risk assessment completed?
  • Call light within patient reach?
  • Bed in lowest position with brakes locked?

Related Healthcare Checklists

Related Clinical Operations Checklists

Why Use This Wound VAC/NPWT Management Checklist?

This wound vac/npwt management checklist helps healthcare teams maintain compliance and operational excellence. Designed for wound care nurse professionals, this checklist covers 32 critical inspection points across 7 sections. Recommended frequency: per dressing change.

Ensures compliance with WOCN Guidelines, Manufacturer Instructions, Hospital Wound Care Policy. Regulatory-aligned for audit readiness and inspection documentation.

Frequently Asked Questions

What does the Wound VAC/NPWT Management Checklist cover?

This checklist covers 32 inspection items across 7 sections: Preparation, Wound Assessment, Dressing Application, Device Settings, Pre-Assessment Information, Infection Prevention & Control, Patient Safety & Identification. It is designed for healthcare operations and compliance.

How often should this checklist be completed?

This checklist should be completed per dressing change. Each completion takes approximately 30-45 minutes.

Who should use this Wound VAC/NPWT Management Checklist?

This checklist is designed for Wound Care Nurse professionals in the healthcare industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.

Can I download this checklist as a PDF?

Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.

Browse More Checklists