Laundromat Floor Drain and Plumbing Inspection Checklist [FREE PDF]

Laundromat floor drains and plumbing systems are subject to local plumbing codes, ADA accessibility standards, and EPA wastewater discharge regulations. Regular inspection prevents costly flooding incidents, ensures proper wastewater containment, and maintains accessible pathways required under ADA Standards for Accessible Design Section 302-303. Owners must document drain functionality, backflow prevention devices, and water temperature compliance to satisfy both health department inspections a

  • Industry: Laundromat
  • Frequency: Monthly
  • Estimated Time: 30-45 minutes
  • Role: Laundromat Owner
  • Total Items: 35
  • Compliance: ADA Standards for Accessible Design Section 302-303, EPA 40 CFR 403 Pretreatment Standards, OSHA 29 CFR 1910.22 Walking-Working Surfaces, IPC International Plumbing Code Section 1003 Interceptors, ASME A112.21.2 Floor Drains

Floor Drain Physical Condition

Assess the physical state of all floor drains, grates, and drain bodies throughout the facility.

  • Are all floor drain grates present, secured, and free of cracks or damage?
  • Are drain grates flush with or recessed below the finished floor surface?
  • Are all floor drains free of visible debris, lint, and blockage?
  • Is there evidence of standing water or slow drainage in any area of the facility?
  • Please photograph any damaged or blocked drains observed during inspection.

Drain Flow and Functionality Testing

Test active drainage capacity and verify drains are accepting and conveying water effectively.

  • Does each floor drain accept water freely without backup when tested with a bucket pour?
  • Are floor drain traps primed and holding water to prevent sewer gas entry?
  • Is there any detectable sewage odor present near floor drains during inspection?
  • What is the approximate drain flow clearance time in seconds for the slowest drain tested?
  • Are all machine discharge hoses properly seated in standpipes or drain receptacles?

Backflow Prevention Devices

Verify that all required backflow prevention devices are installed, tagged, and functionally sound.

  • Is a backflow prevention device installed on the main water supply line serving the facility?
  • Has the backflow preventer been tested and certified within the past 12 months?
  • Is the backflow device test certification tag current, legible, and attached to the device?
  • Are individual machine supply connections equipped with hose bibb vacuum breakers?
  • Is there any sign of leakage, corrosion, or physical damage on the backflow prevention assembly?

Lint and Solids Interceptors

Inspect lint interceptors and any sediment traps required before discharge to the municipal sewer.

  • Is a lint interceptor or basket strainer installed on the common laundry drain before it exits the building?
  • Has the lint interceptor basket been cleaned within the past 30 days?
  • Is the interceptor basket free of tears, corrosion, or gaps that would allow lint to bypass?
  • Is there a maintenance log for the interceptor accessible on-site for regulatory review?
  • Are interceptor access covers properly sealed and not allowing sewer gas emission?

Water Supply and Temperature Compliance

Verify hot and cold water supply temperatures and pressure meet equipment and health code requirements.

  • What is the measured hot water supply temperature at the closest machine connection?
  • Is the domestic hot water heater temperature set to at least 120°F to prevent Legionella growth?
  • Is static water pressure between 30-80 PSI at the main supply connection?
  • Are pressure reducing valves (PRV) present and functioning if supply pressure exceeds 80 PSI?
  • Are hot and cold water supply shutoffs accessible and operable for each machine bank?

ADA Accessibility and Floor Surface Compliance

Evaluate floor surfaces, drain placement, and accessible routes for compliance with ADA Standards.

  • Are all accessible route floor surfaces stable, firm, and slip-resistant including areas near drains?
  • Do any floor drain grate openings exceed 1/2 inch in the direction of travel on accessible routes?
  • Are anti-slip mats or treatments present in consistently wet zones without blocking drain access?
  • Are floor slopes directing water to drains within 1:48 maximum cross-slope on accessible routes?
  • Is there photographic documentation of all drain locations and accessible route conditions?

Corrective Actions and Follow-Up

Document deficiencies identified during inspection and assign corrective action timelines.

  • Were any critical deficiencies identified that require immediate corrective action?
  • Please describe all deficiencies identified and the corrective action planned.
  • Has the facility plumber been notified of any issues requiring licensed plumber repair?
  • Has this inspection report been filed in the facility maintenance log for regulatory review?
  • What is the scheduled date for the next plumbing inspection?

Related Laundry Dry Cleaning Checklists

Related Laundromat Self Service Checklists

Why Use This Laundromat Floor Drain and Plumbing Inspection Checklist [FREE PDF]?

This laundromat floor drain and plumbing inspection checklist [free pdf] helps laundromat teams maintain compliance and operational excellence. Designed for laundromat owner professionals, this checklist covers 35 critical inspection points across 7 sections. Recommended frequency: monthly.

Ensures compliance with ADA Standards for Accessible Design Section 302-303, EPA 40 CFR 403 Pretreatment Standards, OSHA 29 CFR 1910.22 Walking-Working Surfaces, IPC International Plumbing Code Section 1003 Interceptors, ASME A112.21.2 Floor Drains. Regulatory-aligned for audit readiness and inspection documentation.

Frequently Asked Questions

What does the Laundromat Floor Drain and Plumbing Inspection Checklist [FREE PDF] cover?

This checklist covers 35 inspection items across 7 sections: Floor Drain Physical Condition, Drain Flow and Functionality Testing, Backflow Prevention Devices, Lint and Solids Interceptors, Water Supply and Temperature Compliance, ADA Accessibility and Floor Surface Compliance, Corrective Actions and Follow-Up. It is designed for laundromat operations and compliance.

How often should this checklist be completed?

This checklist should be completed monthly. Each completion takes approximately 30-45 minutes.

Who should use this Laundromat Floor Drain and Plumbing Inspection Checklist [FREE PDF]?

This checklist is designed for Laundromat Owner professionals in the laundromat industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.

Can I download this checklist as a PDF?

Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.

Browse More Checklists