SDS (Safety Data Sheet) Review - FREE PDF
Review Safety Data Sheets to ensure hazard information is available for all chemicals.
- Industry: Manufacturing
- Frequency: At Receipt / Annually
- Estimated Time: 10-15 minutes per SDS
- Role: Safety / EHS Manager
- Total Items: 28
- Compliance: OSHA 1910.1200, GHS, OSHA HazCom 2012
Header Information
Complete header fields for this inspection.
- Location/Site
- Date
- Inspector Name
- Reference/Permit Number
Pre-Inspection Verification
Verify conditions before beginning inspection.
- Required documentation available?
- Inspection equipment ready?
- Area accessible and safe?
- Required PPE worn?
Primary Inspection Points
Complete main inspection items.
- Primary condition acceptable?
- Secondary systems functional?
- Safety features operational?
- Labeling/marking compliant?
- No visible damage or wear?
- Maintenance current?
Compliance & Standards
Verify regulatory compliance requirements.
- Applicable standards met?
- Required records current?
- Personnel training verified?
- Required permits/certifications valid?
Safety & Hazard Assessment
Evaluate safety conditions and hazards.
- Hazards identified and controlled?
- Emergency provisions adequate?
- Access/egress clear?
- Housekeeping acceptable?
Findings & Corrective Actions
Document inspection findings and required actions.
- Overall Condition/Rating
- Deficiencies Found
- Corrective Actions Required
- Follow-up Date
- Inspector Signature
- Supervisor Signature
Related Manufacturing Checklists
- Manufacturing Quality Control Inspection
- Shift Start Production Readiness Checklist
- End of Shift Shutdown & Handover Checklist - FREE PDF
- In-Process Quality Check Checklist
- Daily Preventive Maintenance Walkthrough
- Packaging Line Compliance Checklist