HSE & BS EN 1037 Permit to Work System Annual Review Checklist
This checklist covers compliance with Health and Safety at Work etc. Act 1974 and applicable UK statutory requirements for manufacturing operations. Non-compliance can result in unlimited fines and enforcement action under the Health and Safety at Work etc. Act 1974 and applicable UK statutory instruments.
- Industry: Manufacturing
- Frequency: Quarterly
- Estimated Time: 20-30 minutes
- Role: Safety Manager
- Total Items: 20
- Compliance: Health and Safety at Work etc. Act 1974, Management of Health and Safety at Work Regulations 1999, HSE Approved Codes of Practice, BS EN ISO 45001:2018
Statutory Compliance, Registration & Risk Assessment
Verify statutory registrations, risk assessments, and Competent Person designation per UK law.
- Are all relevant statutory licences, permits, and registrations current, displayed where required, and available for inspection?
- Has a suitable and sufficient risk assessment been completed and communicated to relevant workers?
- Is a Competent Person designated for this area of compliance per the relevant statutory requirement?
- Attach photo of statutory registrations, risk assessment, and Competent Person appointment documentation:
Competence, Monitoring & Outstanding Actions
Verify worker competence, active monitoring programme, and outstanding corrective actions.
- Are all workers competent for their tasks (trained, experienced, or supervised as appropriate)?
- Is monitoring and measurement of key compliance indicators carried out at required frequencies?
- Number of outstanding corrective actions from previous inspection or audit:
- Attach photo of training records, monitoring reports, and corrective action tracker:
Emergency Procedures, Signage & Legal Notices
Verify emergency procedures, mandatory statutory signage, and drill records.
- Are emergency procedures documented, practiced through drills, and records maintained?
- Are all statutory notices, signage, and warnings correctly displayed per applicable regulations?
- Overall compliance with applicable UK statutory requirements:
- Attach photo of emergency drill records, statutory signage register, and compliance certificates:
Enforcement Compliance & Management Review
Verify enforcement notice compliance, management review programme, and senior accountability.
- Have all findings from previous regulatory inspections, enforcement notices, and prohibition orders been resolved?
- Is management review of the health and safety management system conducted at least annually?
- Number of open enforcement actions or improvement notices outstanding:
- Senior Responsible Officer certification of inspection completion:
Corrective Actions & Inspector Sign-Off
Document all deficiencies and assign corrective actions. POPProbe auto-assigns these to team members, generates a signed PDF report instantly, and tracks compliance status across all locations. -> Start free, no credit card required
- List all deficiencies identified in this inspection:
- Overall compliance status?
- Corrective actions assigned to (name and department):
- Inspector digital signature and date:
Related Manufacturing Checklists
- MHSWR 1999 Regulation 8 Emergency Procedures & Drills Compliance
- Social Security (Claims & Payments) Regs 1979 Accident Book Compliance
- SRSCR 1977 Safety Representatives & Safety Committee Records Audit
- Health & Safety (Safety Signs & Signals) Regs 1996 Compliance Audit
- Export Control Order 2008 & ECJU Dual Use Export Licence Compliance
- Modern Slavery Act 2015 Section 54 Supply Chain Annual Audit
- Employers Liability (Compulsory Insurance) Act 1969 Compliance Audit
- OPSS Product Safety Recall & Corrective Action Compliance Checklist
Related Workplace Safety Checklists
- Machine Guarding (Automotive Plant) Checklist - FREE Download
- Brazil NR-05 CIPA Inspection Checklist - FREE Download
- Factories Act Safety Inspection Checklist - India - FREE Download
- UAE OSHAD Workplace Safety Inspection Checklist - FREE Download
- UAE MOHRE Workplace Safety Compliance Checklist - FREE Download
- OSHA 29 CFR 1910.119 Process Safety Information (PSI) Checklist - FREE Download
- OSHA 29 CFR 1910.119(e) Process Hazard Analysis (PHA) Checklist - FREE Download
- OSHA 29 CFR 1910.119(f) Operating Procedures Checklist - FREE Download
- OSHA 29 CFR 1910.119(g) PSM Training & Competency Checklist - FREE Download
- OSHA 29 CFR 1910.119(h) Contractor Safety Management Checklist - FREE Download
Why Use This HSE & BS EN 1037 Permit to Work System Annual Review Checklist?
This hse & bs en 1037 permit to work system annual review checklist helps manufacturing teams maintain compliance and operational excellence. Designed for safety manager professionals, this checklist covers 20 critical inspection points across 5 sections. Recommended frequency: quarterly.
Ensures compliance with Health and Safety at Work etc. Act 1974, Management of Health and Safety at Work Regulations 1999, HSE Approved Codes of Practice, BS EN ISO 45001:2018. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What is a HSE & BS EN 1037 Permit to Work System Annual Review Checklist?
A HSE & BS EN 1037 Permit to Work System Annual Review Checklist is a standardized inspection form used by safety manager to ensure consistent manufacturing operations. It contains 27 inspection points organized into 5 sections. FREE PDF - HSE & BS EN 1037 Permit to Work System Annual Review checklist for UK operations. Covers Health and Safety at Work etc. Act 1974 requirements. Download FREE template.
How often should I use this manufacturing checklist?
This checklist is designed to be completed quarterly. Regular use ensures compliance with Health and Safety at Work etc. Act 1974 and Management of Health and Safety at Work Regulations 1999 and helps identify issues before they become problems.
Can I download this HSE & BS EN 1037 Permit to Work System Annual Review Checklist as a PDF?
Yes, you can download this checklist as a FREE PDF for printing or offline use. The checklist includes 27 fields across 5 sections and typically takes 20-30 minutes to complete.
What compliance standards does this checklist cover?
This checklist helps ensure compliance with Health and Safety at Work etc. Act 1974, Management of Health and Safety at Work Regulations 1999, HSE Approved Codes of Practice, BS EN ISO 45001:2018. Following these standards protects your organization and ensures best practices.
How do I complete this manufacturing inspection checklist?
Begin by completing the header fields for Site / Premises Name, Inspection Date, Inspector Name & Title, and Reference / Permit Number. Work through each of the 5 sections, marking items Yes or No as applicable. Add notes for any issues found. Finally, complete the footer fields and add your signature. The entire process takes approximately 20 to 30 minutes.
What are the key sections in this manufacturing checklist?
This manufacturing checklist is organized into 5 key sections: Statutory Compliance, Registration & Risk Assessment, Competence, Monitoring & Outstanding Actions, Emergency Procedures, Signage & Legal Notices, Enforcement Compliance & Management Review, Corrective Actions & Inspector Sign-Off. Each section contains specific inspection points that safety manager must verify. The structured layout ensures nothing is missed during manufacturing inspections and makes the process efficient, typically taking 20-30 minutes to complete.
Who should use this HSE & BS EN 1037 Permit to Work System Annual Review Checklist?
This checklist is primarily designed for safety manager working in manufacturing operations. However, it is also valuable for quality assurance teams, safety officers, compliance managers, and supervisors who need to verify that manufacturing standards are being met. Organizations of all sizes can benefit from using this HSE & BS EN 1037 Permit to Work System Annual Review Checklist to maintain consistency and accountability.