Mine Winding Hoist and Skip System Inspection Checklist
This comprehensive mine winding hoist and skip system inspection checklist ensures regulatory compliance with MSHA, AS 3961, South Africa MHSA, 30 CFR 57.19002. Pre-shift and periodic inspection of mine winding hoists, cages, skips, and headframes per MSHA 30 CFR Part 57 Subpart R and equivalent Australian AS 3961 and South African MHSA standards. Hoist failures can cause multiple fatalities and extended mine shutdowns. Complete all sections to maintain compliance documentation and audit readine
- Industry: Mining
- Frequency: Per Shift / Daily
- Estimated Time: 40 minutes
- Role: Mine Safety Officer / Site Manager
- Total Items: 20
- Compliance: MSHA, AS 3961, South Africa MHSA, 30 CFR 57.19002
Winding Rope and Conveyances
Inspect hoist ropes and conveyances per 30 CFR 57.19002.
- Has hoist rope been visually inspected per 30 CFR 57.19030 prior to beginning hoisting operations?
- Does rope have fewer than prescribed maximum broken wires per lay length per manufacturer specification?
- Is rope diameter within 2.5% of nominal diameter with no significant diameter reduction indicating core failure?
- Is cage or skip structure free of cracking, distortion, or door/gate failures?
- Is rope lubricated per schedule to prevent corrosion and wear?
- Are all rope end connections (ferrule sockets, spelter cappings) inspected and secure?
Safety Devices and Overwind Protection
Test safety devices per 30 CFR 57.19020.
- Is overwind protection device tested and will it stop hoist before rope/conveyance reaches danger point?
- Do hoist brakes bring loaded conveyance to stop within design distance from any point in shaft?
- Does depth indicator accurately show conveyance position throughout shaft travel?
- Is bell or electronic signal system functioning for communication between shaft stations and hoistman?
- For friction (Koepe) hoists, is slip detection system calibrated and functioning?
Headframe and Shaft Inspection
Inspect shaft infrastructure per 30 CFR 57.19050.
- Is headframe structure free of corrosion, cracking, or distortion at critical members?
- Are sheave wheel flanges, grooves, and bearings in serviceable condition?
- Has shaft been inspected for loose timbers, spalling, rock, or other obstructions per required schedule?
- Are shaft guides, buntons, and dividers free of damage or misalignment?
- Is shaft sump free of accumulated debris that could be picked up and thrown?
Hoistman Qualification and Records
Verify hoistman training and records per 30 CFR 57.19023.
- Is hoistman certified per 30 CFR 57.19023 or applicable state/country certification requirement?
- Are hoist inspection and maintenance records current and available for review?
- Are safety devices tested at frequency specified in mine's approved hoist examination schedule?
- Have non-destructive tests (magnetic particle, dye penetrant) been performed on rope attachment hardware per schedule?
Related Mining Quarrying Checklists
- Surface Mine Reclamation and Water Quality Monitoring Checklist
- Surface Mine Personal Protective Equipment Compliance Checklist
- Underground Mine Confined Space and Permit-Required Space Entry Checklist
- Coal Mine Rock Dusting and Combustible Dust Control Checklist
Why Use This Mine Winding Hoist and Skip System Inspection Checklist?
This mine winding hoist and skip system inspection checklist helps mining teams maintain compliance and operational excellence. Designed for mine safety officer / site manager professionals, this checklist covers 20 critical inspection points across 4 sections. Recommended frequency: per shift / daily.
Ensures compliance with MSHA, AS 3961, South Africa MHSA, 30 CFR 57.19002. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What is a Mine Winding Hoist and Skip System Inspection Checklist?
A Mine Winding Hoist and Skip System Inspection Checklist is a standardized inspection form used by mine safety officer / site manager to ensure consistent mining operations. It contains 29 inspection points organized into 4 sections. FREE mine winding hoist and skip system inspection checklist PDF. Pre-shift and periodic inspection of mine winding hoists, cages, skips, and headframes per MSHA 30 CFR Part 57 Subpart R and equivalent Australian AS 3961 and South African MHSA standards. Compliant with MSHA, AS 3961, South Africa MHSA, 30 CFR 57.19002. Download FREE digital template for mining & quarrying operations compliance now.
How often should I use this mining checklist?
This checklist is designed to be completed per shift / daily. Regular use ensures compliance with MSHA and AS 3961 and helps identify issues before they become problems.
Can I download this Mine Winding Hoist and Skip System Inspection Checklist as a PDF?
Yes, you can download this checklist as a FREE PDF for printing or offline use. The checklist includes 29 fields across 4 sections and typically takes 40 minutes to complete.
What compliance standards does this checklist cover?
This checklist helps ensure compliance with MSHA, AS 3961, South Africa MHSA, 30 CFR 57.19002. Following these standards protects your organization and ensures best practices.
How do I complete this mining inspection checklist?
Begin by completing the header fields for Mine/Site Name, Inspection Date, Inspector Name, Shift, and Mine Permit/ID Number. Work through each of the 4 sections, marking items Yes or No as applicable. Finally, complete the footer fields and add your signature. The entire process takes approximately 40 minutes.
What are the key sections in this mining checklist?
This mining checklist is organized into 4 key sections: Winding Rope and Conveyances, Safety Devices and Overwind Protection, Headframe and Shaft Inspection, Hoistman Qualification and Records. Each section contains specific inspection points that mine safety officer / site manager must verify. The structured layout ensures nothing is missed during mining inspections and makes the process efficient, typically taking 40 minutes to complete.
Who should use this Mine Winding Hoist and Skip System Inspection Checklist?
This checklist is primarily designed for mine safety officer / site manager working in mining operations. However, it is also valuable for quality assurance teams, safety officers, compliance managers, and supervisors who need to verify that mining standards are being met. Organizations of all sizes can benefit from using this Mine Winding Hoist and Skip System Inspection Checklist to maintain consistency and accountability.