Cut-Resistant Glove Assessment Checklist [FREE PDF]

Cut-resistant glove selection and compliance fall under OSHA 29 CFR 1910.138, which requires employers to select hand protection based on the performance characteristics of the glove relative to the tasks performed, conditions present, duration of use, and hazards identified. The ANSI/ISEA 105-2016 standard establishes a nine-level (A1–A9) cut resistance classification system for the North American market, while the European EN 388:2016+A1:2018 standard uses a combination of Coupe test and ISO 1

  • Industry: Manufacturing
  • Frequency: Monthly
  • Estimated Time: 20-35 minutes
  • Role: PPE Coordinator
  • Total Items: 35
  • Compliance: OSHA 29 CFR 1910.138 - Hand Protection, OSHA 29 CFR 1910.132 - General PPE Requirements, ANSI/ISEA 105-2016 - Hand Protection Selection, EN 388:2016+A1:2018 - Protective Gloves Against Mechanical Risks, EN ISO 13997:1999 - Protective Clothing Cut Resistance TDM Test

Hand Hazard Identification

Identify and document the specific cut and laceration hazards present in the work area before assessing glove adequacy.

  • Has a formal hand hazard assessment been conducted and documented for all tasks in this work area?
  • Does the hazard assessment identify the type, sharpness, and shape of cutting edges or objects present?
  • Are pinch point, crush, and puncture hazards identified separately from cut hazards in the assessment?
  • Are chemical or thermal hazards present in conjunction with cut hazards that require multi-hazard glove selection?
  • What is the highest ANSI/ISEA 105-2016 cut level (A1-A9) required based on the hazard assessment?

Glove Selection Adequacy

Confirm that selected gloves match the identified cut hazard level and are appropriate for the task.

  • Do the gloves in use carry an ANSI/ISEA 105-2016 cut level marking equal to or exceeding the required level?
  • If procured for European compliance, do gloves carry a valid EN 388:2016+A1:2018 pictogram with a numeric/letter performance rating?
  • Are gloves selected for dexterity, grip, and fit appropriate for the precision required by the task?
  • Are glove sizes available to properly fit all workers performing the task (no gloves too large or too small)?
  • For tasks involving rotating machinery, have anti-snag or gloveless alternatives been evaluated?

Glove Physical Condition Inspection

Physically inspect gloves currently in use for damage, wear, and degradation that reduces cut protection.

  • Are gloves free from visible cuts, slices, or abrasions that penetrate or significantly wear the cut-resistant material?
  • Are gloves free from holes, fraying seams, or separation at stitching lines?
  • Do gloves show signs of coating wear (e.g., nitrile, polyurethane, latex) that may reduce grip and wet performance?
  • Are gloves free from contamination with oils, chemicals, or biological materials that may compromise performance?
  • Capture a photo of gloves showing the current condition of the palm and finger areas.
  • Are gloves with wire or steel strand liners inspected for broken wires that could cause internal puncture?

Worker Compliance & Actual Usage

Observe and document whether workers are consistently wearing cut-resistant gloves in accordance with the hazard assessment requirements.

  • Are all workers performing identified cut-hazard tasks actively wearing the required cut-resistant gloves?
  • Are gloves worn correctly (fully on the hand, not rolled back at cuffs, not modified or altered)?
  • Do workers remove gloves when performing tasks where glove use creates a greater hazard (e.g., near rotating equipment)?
  • Do workers perform a pre-use inspection of gloves before each shift or task as trained?
  • Is there a documented process for workers to report damaged gloves and obtain replacements without delay?

Training & Worker Awareness

Verify that workers understand the rationale for cut-level selection, glove limitations, and proper use procedures.

  • Have all workers been trained on ANSI/ISEA 105-2016 cut levels and how their specific glove protects against identified hazards?
  • Are workers aware that cut-resistant does not mean cut-proof, and trained on residual risks?
  • Is training documentation (sign-in sheets or records) available and current within the last 12 months?
  • Have workers been trained on proper glove care, cleaning, and storage to maintain performance?

Inventory Management & Procurement

Assess whether glove inventory, procurement practices, and product verification are adequate to maintain continuous protection.

  • Is a current approved glove product list maintained that specifies cut level, manufacturer, and model for each task?
  • Are new glove deliveries verified against the approved product list before being issued to workers?
  • Is there sufficient stock of correct-size gloves to avoid rationing or reuse of damaged gloves?
  • Are gloves stored in conditions that prevent UV degradation, contamination, and physical damage to packaging?
  • Capture a photo of the current glove inventory storage area.

Incident History & Continuous Improvement

Review past hand injuries and near-misses to evaluate whether current glove program is adequately controlling cut risk.

  • Have any hand lacerations or cut injuries occurred in this work area within the past 12 months?
  • If injuries occurred, were root cause analyses completed and corrective actions implemented?
  • Have near-miss events involving glove failure or inadequate protection been reported and investigated?
  • Is glove performance feedback from workers collected systematically and used to inform product selection?
  • Please document any deficiencies identified, corrective actions required, and responsible parties for follow-up.

Related Ppe Checklists

Related Hand Protection Checklists

Why Use This Cut-Resistant Glove Assessment Checklist [FREE PDF]?

This cut-resistant glove assessment checklist [free pdf] helps manufacturing teams maintain compliance and operational excellence. Designed for ppe coordinator professionals, this checklist covers 35 critical inspection points across 7 sections. Recommended frequency: monthly.

Ensures compliance with OSHA 29 CFR 1910.138 - Hand Protection, OSHA 29 CFR 1910.132 - General PPE Requirements, ANSI/ISEA 105-2016 - Hand Protection Selection, EN 388:2016+A1:2018 - Protective Gloves Against Mechanical Risks, EN ISO 13997:1999 - Protective Clothing Cut Resistance TDM Test. Regulatory-aligned for audit readiness and inspection documentation.

Frequently Asked Questions

What does the Cut-Resistant Glove Assessment Checklist [FREE PDF] cover?

This checklist covers 35 inspection items across 7 sections: Hand Hazard Identification, Glove Selection Adequacy, Glove Physical Condition Inspection, Worker Compliance & Actual Usage, Training & Worker Awareness, Inventory Management & Procurement, Incident History & Continuous Improvement. It is designed for manufacturing operations and compliance.

How often should this checklist be completed?

This checklist should be completed monthly. Each completion takes approximately 20-35 minutes.

Who should use this Cut-Resistant Glove Assessment Checklist [FREE PDF]?

This checklist is designed for PPE Coordinator professionals in the manufacturing industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.

Can I download this checklist as a PDF?

Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.

Browse More Checklists