RF Exposure Safety & Control Checklist
This comprehensive telecom checklist supports compliance with OSHA 29 CFR 1910.268 (Telecommunications) and OSHA 29 CFR 1926 Subpart M (Fall Protection), helping field teams manage high-risk work safely. Designed for RF Safety Officer roles in Telecommunications to document controls, evidence, and corrective actions.
- Industry: Telecommunications
- Frequency: Per job
- Estimated Time: 25-40 minutes
- Role: RF Safety Officer
- Total Items: 42
- Compliance: OSHA 29 CFR 1910.268 (Telecommunications), OSHA 29 CFR 1926 Subpart M (Fall Protection), FCC RF Exposure Guidelines (OET Bulletin 65), ANSI/TIA-222 (Antenna Supporting Structures), NFPA 70 (NEC)
Site Access & Permits
Confirm access authorization, permits, and notifications are in place.
- Access authorization obtained?
- Permits (hot work, confined space) issued if required?
- Utility locates completed where digging occurs?
- Site hazards briefed in pre-job meeting?
- Notes / observations
- Photo evidence
Fall Protection & Tower Safety
Verify fall protection systems, rescue readiness, and safe climbing practices.
- Harness/lanyards inspected and in date?
- Anchorage points verified and rated?
- Rescue plan and kit onsite?
- 100% tie-off maintained during ascent/descent?
- Notes / observations
- Photo evidence
RF Exposure & Lockout
Control RF exposure and ensure lockout/tagout of transmitters when required.
- RF hazard assessment completed?
- Transmitters reduced/locked out per plan?
- RF monitors/alarms functional?
- Exclusion zones posted and respected?
- Notes / observations
- Photo evidence
Electrical & Power Systems
Inspect power, grounding, batteries, and generators for safe condition.
- Lockout/tagout applied before work on energized parts?
- Grounding/bonding intact and tested?
- Battery rooms ventilated; spill controls present?
- Generators fueled and maintained; exhaust safe?
- Notes / observations
- Photo evidence
Equipment Installation & Cabling
Verify mounting, cable management, labeling, and weatherproofing.
- Equipment mounted per manufacturer torque/spec?
- Cables dressed; bend radius maintained?
- Connectors weatherproofed; drip loops present?
- Labels match as-built documentation?
- Notes / observations
- Photo evidence
Housekeeping & Weather Readiness
Confirm housekeeping, tool control, and weather controls.
- Tools accounted for; dropped object prevention used?
- Housekeeping acceptable; trip hazards removed?
- Lightning/wind thresholds monitored?
- Site fencing/locks intact?
- Notes / observations
- Photo evidence
Corrective Actions & Stop Work
Document findings and apply stop-work for unsafe conditions.
- Stop-work used for imminent danger?
- Corrective actions assigned with owner and due date?
- Photos captured for deficiencies?
- Re-test/re-inspection scheduled?
- Notes / observations
- Photo evidence
Related Safety Compliance Checklists
- Battery Room Safety & Maintenance Checklist
- Telecom Line Work Safety Checklist #1
- Telecom Line Work Safety Checklist #2
- Telecom Line Work Safety Checklist #3
- Telecom Line Work Safety Checklist #4
- Telecom Line Work Safety Checklist #5
- Telecom Line Work Safety Checklist #6
- Telecom Line Work Safety Checklist #7
Related Telecom Checklists
- Telecom Tower Climb Safety Checklist - FREE Download
- Battery Room Safety & Maintenance Checklist - FREE Download
- Telecom Line Work Safety Checklist #1 - FREE Download
- Telecom Line Work Safety Checklist #2 - FREE Download
- Telecom Line Work Safety Checklist #3 - FREE Download
- Telecom Line Work Safety Checklist #4 - FREE Download
- Telecom Line Work Safety Checklist #5 - FREE Download
- Telecom Line Work Safety Checklist #6 - FREE Download
- Telecom Line Work Safety Checklist #7 - FREE Download
- Telecom Line Work Safety Checklist #8 - FREE Download
Why Use This RF Exposure Safety & Control Checklist?
This rf exposure safety & control checklist helps telecommunications teams maintain compliance and operational excellence. Designed for rf safety officer professionals, this checklist covers 42 critical inspection points across 7 sections. Recommended frequency: per job.
Ensures compliance with OSHA 29 CFR 1910.268 (Telecommunications), OSHA 29 CFR 1926 Subpart M (Fall Protection), FCC RF Exposure Guidelines (OET Bulletin 65), ANSI/TIA-222 (Antenna Supporting Structures), NFPA 70 (NEC). Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What does the RF Exposure Safety & Control Checklist cover?
This checklist covers 42 inspection items across 7 sections: Site Access & Permits, Fall Protection & Tower Safety, RF Exposure & Lockout, Electrical & Power Systems, Equipment Installation & Cabling, Housekeeping & Weather Readiness, Corrective Actions & Stop Work. It is designed for telecommunications operations and compliance.
How often should this checklist be completed?
This checklist should be completed per job. Each completion takes approximately 25-40 minutes.
Who should use this RF Exposure Safety & Control Checklist?
This checklist is designed for RF Safety Officer professionals in the telecommunications industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.
Can I download this checklist as a PDF?
Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.