Ground Control & Scaling Inspection Checklist
This comprehensive ground control & scaling inspection checklist helps teams maintain regulatory compliance and operational control against MSHA 30 CFR, OSHA 29 CFR 1910, and related requirements. Designed for Mine Supervisor / Safety Officer, complete all sections, capture evidence, and log corrective actions to reduce risk and improve readiness.
- Industry: Mining
- Frequency: Weekly
- Estimated Time: 20-40 minutes
- Role: Mine Supervisor / Safety Officer
- Total Items: 35
- Compliance: MSHA 30 CFR, OSHA 29 CFR 1910, ISO 45001, NFPA 70 (NEC)
Shift Briefing & Documentation
Confirm the crew is briefed and critical documents are current.
- Pre-shift safety meeting completed and documented?
- Hazard assessment/JHA completed for tasks?
- Ground control/ventilation plan reviewed (as applicable)?
- Permits and authorizations verified?
- Notes / hazards identified
PPE & Fit-for-Duty
Verify PPE, respiratory protection, and fitness for duty.
- Required PPE available and worn correctly?
- Respirators fit-tested and cartridges in date (if used)?
- High-visibility and headlamp functional where required?
- Fatigue/alcohol/drug policy checks completed?
- Photo evidence of PPE compliance
Mobile Equipment & Haul Road Safety
Ensure heavy mobile equipment and haul roads are safe.
- Pre-op inspection completed for haul trucks/loaders?
- Seat belts, alarms, and lights functional?
- Haul road berms, signage, and speed controls in place?
- Traffic management plan followed (right-of-way, radio calls)?
- Record defects or road issues
Ground Control & Working Conditions
Inspect ground conditions, scaling, and support systems.
- Ground conditions inspected (loose rock, rib/spalling)?
- Scaling and support installed per plan (bolts, mesh, sets)?
- Barricades/signage used for hazardous areas?
- Monitoring instruments read and within limits (if used)?
- Photo of face/roof condition
Ventilation, Dust, and Noise Controls
Verify ventilation performance and exposure controls.
- Ventilation controls operating as required (fans, doors, ducting)?
- Dust suppression in use (water sprays, collectors)?
- Air quality checks performed (gases) where required?
- Noise controls and hearing protection enforced?
- Record readings or monitoring log ID
Explosives & Blasting Controls
Confirm explosives handling and blasting safety measures.
- Explosives stored and transported per site rules?
- Authorized personnel only; logs complete?
- Blast area cleared and guarded; signals followed?
- Misfire procedures understood and available?
- Notes / issues
Emergency Response & Incident Reporting
Ensure readiness for emergencies and effective reporting.
- Escape routes and refuge stations clear (underground) / muster points known (surface)?
- First aid, eyewash, and fire extinguishers inspected?
- Emergency communications operational (radios, phones)?
- Near-misses and hazards reported and tracked?
- Corrective actions assigned and due dates set?
Related Safety Inspections Checklists
- Diesel Equipment Emissions Control Checklist
- Haul Road Inspection Checklist
- Mine First Aid & Rescue Readiness Checklist
- Near-Miss & Incident Reporting (Mine) Checklist
- Ventilation & Air Quality Monitoring Checklist
- Loader/Excavator Pre-Start Checklist
- Haul Truck Pre-Operation Checklist
- Conveyor System Safety Checklist
Related Site Safety Checklists
- Diesel Equipment Emissions Control Checklist - FREE Download
- Haul Road Inspection Checklist - FREE Download
- Mine First Aid & Rescue Readiness Checklist - FREE Download
- Near-Miss & Incident Reporting (Mine) Checklist - FREE Download
Why Use This Ground Control & Scaling Inspection Checklist?
This ground control & scaling inspection checklist helps mining teams maintain compliance and operational excellence. Designed for mine supervisor / safety officer professionals, this checklist covers 35 critical inspection points across 7 sections. Recommended frequency: weekly.
Ensures compliance with MSHA 30 CFR, OSHA 29 CFR 1910, ISO 45001, NFPA 70 (NEC). Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What does the Ground Control & Scaling Inspection Checklist cover?
This checklist covers 35 inspection items across 7 sections: Shift Briefing & Documentation, PPE & Fit-for-Duty, Mobile Equipment & Haul Road Safety, Ground Control & Working Conditions, Ventilation, Dust, and Noise Controls, Explosives & Blasting Controls, Emergency Response & Incident Reporting. It is designed for mining operations and compliance.
How often should this checklist be completed?
This checklist should be completed weekly. Each completion takes approximately 20-40 minutes.
Who should use this Ground Control & Scaling Inspection Checklist?
This checklist is designed for Mine Supervisor / Safety Officer professionals in the mining industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.
Can I download this checklist as a PDF?
Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.