LOLER 1998 Regulation 7 Safe Working Load Marking Compliance Audit
This checklist covers compliance with Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) and applicable UK statutory requirements for manufacturing operations. Non-compliance can result in unlimited fines and up to two years imprisonment under Section 33 of the Health and Safety at Work etc. Act 1974, plus Corporate Manslaughter prosecution.
- Industry: Manufacturing
- Frequency: Quarterly
- Estimated Time: 20-30 minutes
- Role: Maintenance Manager
- Total Items: 20
- Compliance: Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), BS EN 13155, BS 7121, PUWER 1998
LOLER Thorough Examination & SWL Compliance
Verify LOLER thorough examination schedule, examination reports, and SWL markings.
- Is all lifting equipment subject to thorough examination by a Competent Person at required intervals?
- Are thorough examination reports (LOLER Examination Reports) retained and defects acted upon?
- Is all lifting equipment adequately marked with Safe Working Load (SWL) and identification?
- Attach photo of LOLER thorough examination reports, SWL markings, and defect register:
Competence, Monitoring & Outstanding Actions
Verify worker competence, active monitoring programme, and outstanding corrective actions.
- Are all workers competent for their tasks (trained, experienced, or supervised as appropriate)?
- Is monitoring and measurement of key compliance indicators carried out at required frequencies?
- Number of outstanding corrective actions from previous inspection or audit:
- Attach photo of training records, monitoring reports, and corrective action tracker:
Emergency Procedures, Signage & Legal Notices
Verify emergency procedures, mandatory statutory signage, and drill records.
- Are emergency procedures documented, practiced through drills, and records maintained?
- Are all statutory notices, signage, and warnings correctly displayed per applicable regulations?
- Overall compliance with applicable UK statutory requirements:
- Attach photo of emergency drill records, statutory signage register, and compliance certificates:
Enforcement Compliance & Management Review
Verify enforcement notice compliance, management review programme, and senior accountability.
- Have all findings from previous regulatory inspections, enforcement notices, and prohibition orders been resolved?
- Is management review of the health and safety management system conducted at least annually?
- Number of open enforcement actions or improvement notices outstanding:
- Senior Responsible Officer certification of inspection completion:
Corrective Actions & Inspector Sign-Off
Document all deficiencies and assign corrective actions. POPProbe auto-assigns these to team members, generates a signed PDF report instantly, and tracks compliance status across all locations. -> Start free, no credit card required
- List all deficiencies identified in this inspection:
- Overall compliance status?
- Corrective actions assigned to (name and department):
- Inspector digital signature and date:
Related Uk Workplace Safety Checklists
- LOLER 1998 Forklift Truck Thorough Examination 12-Month Compliance
- LOLER 1998 Patient Hoists & Slings 6-Month Thorough Examination
- LOLER 1998 Scissor Lift & Hydraulic Platform Examination Checklist
- LOLER 1998 Motor Vehicle Inspection Hoist 6-Month Examination
- Manual Handling Operations Regulations 1992 Risk Assessment Audit
- MHOR 1992 Manual Handling Training Records & Competency Audit
- PPE at Work Regulations 2022 PPE Hazard Assessment & Provision Audit
- PPE at Work Regulations 2022 PPE Inspection, Maintenance & Storage
Related Loler Compliance Checklists
- UK LOLER Lifting Equipment Inspection Checklist - FREE Download
- LOLER 1998 Lifting Equipment Thorough Examination Compliance Audit - FREE Download
- LOLER 1998 Forklift Truck Thorough Examination 12-Month Compliance - FREE Download
- LOLER 1998 Patient Hoists & Slings 6-Month Thorough Examination - FREE Download
- LOLER 1998 Scissor Lift & Hydraulic Platform Examination Checklist - FREE Download
- LOLER 1998 Motor Vehicle Inspection Hoist 6-Month Examination - FREE Download
- LOLER 1998 & WAH 2005 Building Maintenance Unit BMU Examination - FREE Download
- LOLER 1998 Stage & Theatre Rigging Thorough Examination Checklist - FREE Download
Why Use This LOLER 1998 Regulation 7 Safe Working Load Marking Compliance Audit?
This loler 1998 regulation 7 safe working load marking compliance audit helps manufacturing teams maintain compliance and operational excellence. Designed for maintenance manager professionals, this checklist covers 20 critical inspection points across 5 sections. Recommended frequency: quarterly.
Ensures compliance with Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), BS EN 13155, BS 7121, PUWER 1998. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What is a LOLER 1998 Regulation 7 Safe Working Load Marking Compliance Audit?
A LOLER 1998 Regulation 7 Safe Working Load Marking Compliance Audit is a standardized inspection form used by maintenance manager to ensure consistent manufacturing operations. It contains 27 inspection points organized into 5 sections. FREE PDF - LOLER 1998 Regulation 7 Safe Working Load Marking Compliance checklist for UK operations. Covers Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) requirements. Download FREE template.
How often should I use this manufacturing checklist?
This checklist is designed to be completed quarterly. Regular use ensures compliance with Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) and BS EN 13155 and helps identify issues before they become problems.
Can I download this LOLER 1998 Regulation 7 Safe Working Load Marking Compliance Audit as a PDF?
Yes, you can download this checklist as a FREE PDF for printing or offline use. The checklist includes 27 fields across 5 sections and typically takes 20-30 minutes to complete.
What compliance standards does this checklist cover?
This checklist helps ensure compliance with Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), BS EN 13155, BS 7121, PUWER 1998. Following these standards protects your organization and ensures best practices.
How do I complete this manufacturing inspection checklist?
Begin by completing the header fields for Site / Premises Name, Inspection Date, Inspector Name & Title, and Reference / Permit Number. Work through each of the 5 sections, marking items Yes or No as applicable. Add notes for any issues found. Finally, complete the footer fields and add your signature. The entire process takes approximately 20 to 30 minutes.
What are the key sections in this manufacturing checklist?
This manufacturing checklist is organized into 5 key sections: LOLER Thorough Examination & SWL Compliance, Competence, Monitoring & Outstanding Actions, Emergency Procedures, Signage & Legal Notices, Enforcement Compliance & Management Review, Corrective Actions & Inspector Sign-Off. Each section contains specific inspection points that maintenance manager must verify. The structured layout ensures nothing is missed during manufacturing inspections and makes the process efficient, typically taking 20-30 minutes to complete.
Who should use this LOLER 1998 Regulation 7 Safe Working Load Marking Compliance Audit?
This checklist is primarily designed for maintenance manager working in manufacturing operations. However, it is also valuable for quality assurance teams, safety officers, compliance managers, and supervisors who need to verify that manufacturing standards are being met. Organizations of all sizes can benefit from using this LOLER 1998 Regulation 7 Safe Working Load Marking Compliance Audit to maintain consistency and accountability.