Construction & Field Ladder Inspection
This checklist standardizes ladder inspection checklist to improve jobsite safety, quality, and execution consistency. Use it to document controls, capture hazards, and assign corrective actions with sign-off. Includes fall protection controls aligned to OSHA 29 CFR 1926 Subpart M.
- Industry: Construction & Field Services
- Frequency: Daily
- Estimated Time: 60-90 minutes
- Role: Project Manager
- Total Items: 45
- Compliance: OSHA 29 CFR 1926 (Construction Standards), OSHA 29 CFR 1926 Subpart M (Fall Protection)
Planning & Documentation
Confirm scope, permits, and required documentation.
- SOP followed with no skipped steps?
- Any issues found that require escalation?
- Corrective action assigned and tracked?
- Time spent on this section
- Notes
Safety & PPE
Verify PPE, hazard controls, and safe work conditions.
- SOP followed with no skipped steps?
- Any issues found that require escalation?
- Corrective action assigned and tracked?
- Time spent on this section
- Photo evidence
Execution & Work Quality
Verify SOP steps, workmanship, and hold points.
- SOP followed with no skipped steps?
- Any issues found that require escalation?
- Corrective action assigned and tracked?
- Percent complete (estimate)
- Photo evidence
Tools, Equipment & Inspections
Verify equipment readiness, inspections, and defect tagging.
- SOP followed with no skipped steps?
- Any issues found that require escalation?
- Corrective action assigned and tracked?
- Inspections completed (count)
- Photo evidence
Environmental & Site Controls
Verify stormwater, waste, and environmental controls.
- SOP followed with no skipped steps?
- Any issues found that require escalation?
- Corrective action assigned and tracked?
- Time spent on this section
- Photo evidence
Coordination & Communication
Verify handoffs, subcontractor alignment, and constraints.
- SOP followed with no skipped steps?
- Any issues found that require escalation?
- Corrective action assigned and tracked?
- Time spent on this section
- Notes
Issues & CAPA
Document issues, assign owners, and verify corrective action.
- SOP followed with no skipped steps?
- Any issues found that require escalation?
- Corrective action assigned and tracked?
- Time spent on this section
- Photo evidence
Closeout & Sign-Off Preparation
Verify punch items, documentation, and readiness for inspection/turnover.
- SOP followed with no skipped steps?
- Any issues found that require escalation?
- Corrective action assigned and tracked?
- Time spent on this section
- Notes
QA, Corrective Actions & Sign-Off
Confirm completion, prioritize issues, and capture signatures for accountability.
- QA review completed?
- Any critical issues still open?
- Overall risk level
- Superintendent Signature
- Safety/QA Signature
Related Construction Field Services Checklists
- Roof Edge Protection Checklist
- Scissor Lift Pre-Use Checklist
- Boom Lift Pre-Use Checklist
- Guardrails & Toeboards Checklist
- Floor Openings & Hole Covers Checklist
- Fall Rescue Plan Checklist
- Trench Competent Person Daily Checklist
- Protective Systems (Shoring/Shielding) Checklist
Related Working At Heights Checklists
- Fall Protection Plan Checklist - FREE Download
- Harness & Lanyard Inspection Checklist - FREE Download
- Anchor Point Verification Checklist - FREE Download
- Roof Edge Protection Checklist - FREE Download
- Scissor Lift Pre-Use Checklist - FREE Download
- Boom Lift Pre-Use Checklist - FREE Download
- Guardrails & Toeboards Checklist - FREE Download
- Floor Openings & Hole Covers Checklist - FREE Download
- Fall Rescue Plan Checklist - FREE Download
Why Use This Construction & Field Ladder Inspection?
This construction & field ladder inspection helps construction & field services teams maintain compliance and operational excellence. Designed for project manager professionals, this checklist covers 45 critical inspection points across 9 sections. Recommended frequency: daily.
Ensures compliance with OSHA 29 CFR 1926 (Construction Standards), OSHA 29 CFR 1926 Subpart M (Fall Protection). Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What does the Construction & Field Ladder Inspection cover?
This checklist covers 45 inspection items across 9 sections: Planning & Documentation, Safety & PPE, Execution & Work Quality, Tools, Equipment & Inspections, Environmental & Site Controls, Coordination & Communication, Issues & CAPA, Closeout & Sign-Off Preparation, QA, Corrective Actions & Sign-Off. It is designed for construction & field services operations and compliance.
How often should this checklist be completed?
This checklist should be completed daily. Each completion takes approximately 60-90 minutes.
Who should use this Construction & Field Ladder Inspection?
This checklist is designed for Project Manager professionals in the construction & field services industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.
Can I download this checklist as a PDF?
Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.