Generator Maintenance
Complete before use and weekly.
- Industry: Construction
- Frequency: Daily / Weekly
- Estimated Time: 15-20 minutes
- Role: Site Supervisor / Electrician
- Total Items: 30
- Compliance: OSHA 1926.405, Manufacturer Guidelines
Fluids & Fuel
Check fluids and fuel.
- Fuel level adequate?
- Oil level OK?
- Coolant level OK (if applicable)?
- No fuel or oil leaks?
Electrical Components
Check electrical systems.
- Outlets in good condition?
- Properly grounded?
- Extension cords in good condition?
- GFCI protection functional?
General Condition
Overall generator condition.
- Enclosure/housing intact?
- Exhaust system intact?
- Adequate ventilation?
Pre-Inspection Setup & Documentation
Initial documentation and site preparation verification
- Inspector Name
- Inspection Date
- Project Name / Job Number
- Current Weather Conditions
- Previous inspection findings reviewed?
Safety & Compliance Verification
Verify compliance with applicable OSHA regulations and site safety plan
- Site safety plan posted and accessible?
- All required permits current and displayed?
- SDS/MSDS sheets available for all chemicals on site?
- First aid supplies accessible and stocked?
- Emergency contact information posted?
Personal Protective Equipment (PPE)
Verify all personnel have and are using appropriate PPE
- Hard hats worn by all personnel?
- Safety glasses/eye protection in use?
- High-visibility vests worn where required?
- Steel-toe/safety footwear worn?
- PPE in good condition (no damage)?
Site Conditions & Housekeeping
General site conditions and housekeeping standards
- Walkways and access routes clear of debris?
- Adequate lighting in all work areas?
- Trip hazards identified and addressed?
- Waste properly contained and removed?
Related Construction Checklists
- Daily Construction Site Safety Inspection
- Scaffolding Inspection Checklist
- Excavation & Trenching Safety Inspection
- Roofing Safety Inspection Checklist
- Crane & Lift Inspection Checklist
- Lockout/Tagout (LOTO) Procedure Checklist