Crane Inspection

Complete before each shift.

  • Industry: Construction
  • Frequency: Daily
  • Estimated Time: 30-45 minutes
  • Role: Crane Operator
  • Total Items: 30
  • Compliance: OSHA 1926 Subpart CC, ASME B30.5

Visual Inspection

Walk-around visual check.

  • Boom sections in good condition?
  • Wire rope in good condition?
  • Hooks and latches functioning?
  • Outriggers/stabilizers OK?

Operational Check

Test crane functions.

  • All controls functioning?
  • Load chart visible?
  • Anti-two-block working?
  • Swing brake working?

Safety Devices

Check safety features.

  • Load moment indicator working?
  • Horn working?
  • Fire extinguisher present?

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

  • Inspector Name
  • Inspection Date
  • Project Name / Job Number
  • Current Weather Conditions
  • Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

  • Site safety plan posted and accessible?
  • All required permits current and displayed?
  • SDS/MSDS sheets available for all chemicals on site?
  • First aid supplies accessible and stocked?
  • Emergency contact information posted?

Personal Protective Equipment (PPE)

Verify all personnel have and are using appropriate PPE

  • Hard hats worn by all personnel?
  • Safety glasses/eye protection in use?
  • High-visibility vests worn where required?
  • Steel-toe/safety footwear worn?
  • PPE in good condition (no damage)?

Site Conditions & Housekeeping

General site conditions and housekeeping standards

  • Walkways and access routes clear of debris?
  • Adequate lighting in all work areas?
  • Trip hazards identified and addressed?
  • Waste properly contained and removed?

Related Construction Checklists

Related Equipment Checks Checklists

Why Use This Crane Inspection?

This crane inspection helps construction teams maintain compliance and operational excellence. Designed for crane operator professionals, this checklist covers 30 critical inspection points across 7 sections. Recommended frequency: daily.

Ensures compliance with OSHA 1926 Subpart CC, ASME B30.5. Regulatory-aligned for audit readiness and inspection documentation.

Frequently Asked Questions

What is a Crane Inspection?

A Crane Inspection is a standardized inspection form used by crane operator to ensure consistent construction operations. It contains 45 inspection points organized into 7 sections. FREE crane inspection checklist PDF. Mobile crane pre-operation inspection. Download FREE template now.

How often should I use this construction checklist?

This checklist is designed to be completed daily. Regular use ensures compliance with OSHA 1926 Subpart CC and ASME B30.5 and helps identify issues before they become problems.

Can I download this Crane Inspection as a PDF?

Yes, you can download this checklist as a FREE PDF for printing or offline use. The checklist includes 45 fields across 7 sections and typically takes 30-45 minutes to complete.

What compliance standards does this checklist cover?

This checklist helps ensure compliance with OSHA 1926 Subpart CC, ASME B30.5. Following these standards protects your organization and ensures best practices.

How do I complete this construction inspection checklist?

Begin by completing the header fields for Project Name, Crane ID/Number, Operator Name, and Date. Work through each of the 7 sections, marking items Yes or No as applicable. Add notes for any issues found. Finally, complete the footer fields and add your signature. The entire process takes approximately 30 to 45 minutes.

What are the key sections in this construction checklist?

This construction checklist is organized into 7 key sections: Visual Inspection, Operational Check, Safety Devices, Pre-Inspection Setup & Documentation, Safety & Compliance Verification, Personal Protective Equipment (PPE), Site Conditions & Housekeeping. Each section contains specific inspection points that crane operator must verify. The structured layout ensures nothing is missed during construction inspections and makes the process efficient, typically taking 30-45 minutes to complete.

Who should use this Crane Inspection?

This checklist is primarily designed for crane operator working in construction operations. However, it is also valuable for quality assurance teams, safety officers, compliance managers, and supervisors who need to verify that construction standards are being met. Organizations of all sizes can benefit from using this Crane Inspection to maintain consistency and accountability.

Browse More Checklists

POPProbe