Chain Saw Safety Checklist

This Chain Saw Safety Checklist ensures systematic verification and compliance with OSHA 1910.266, ANSI Z133 requirements. Complete all sections to maintain safety, quality, and regulatory compliance. Document all findings and initiate corrective actions as required.

  • Industry: Construction
  • Frequency: Before use
  • Estimated Time: 20-30 minutes
  • Role: Operator
  • Total Items: 37
  • Compliance: OSHA 1910.266, ANSI Z133

Pre-Inspection Verification

Initial setup and documentation review before inspection.

  • Previous inspection records reviewed?
  • Inspection scope and areas defined?
  • Required PPE available and worn?
  • Inspection tools and forms ready?

Regulatory Compliance Verification

Verify compliance with applicable standards and regulations.

  • Required permits current and posted?
  • Training records current for personnel?
  • Written procedures available at point of use?
  • Required documentation maintained?
  • Required signage properly displayed?

Physical Inspection

Visual and physical inspection of equipment and areas.

  • Overall condition acceptable?
  • No visible damage or defects?
  • Safety guards and barriers in place?
  • Housekeeping standards maintained?
  • Emergency equipment accessible?
  • Exits and egress routes clear?

Operational Verification

Functional testing and operational verification.

  • Equipment operating properly?
  • Safety devices and interlocks functional?
  • Monitoring equipment calibrated?
  • No unusual conditions observed?

Findings and Corrective Actions

Document findings and assign corrective actions.

  • All deficiencies documented?
  • Corrective actions assigned with due dates?
  • Any immediate hazards addressed?
  • Photos of significant findings attached?
  • Overall Inspection Rating
  • Additional Notes and Recommendations
  • Emergency exits unobstructed and properly marked?
  • First aid supplies stocked and accessible?
  • Fire extinguisher accessible and inspection current?
  • All identified hazards documented and controlled?
  • ...and 4 more items

PPE Compliance Verification

Personal protective equipment inspection

  • Hard hats worn in required areas?
  • Safety glasses/goggles worn as required?
  • High-visibility vests worn?
  • Steel-toe boots worn by all workers?

Related Construction Checklists

Related Equipment Maintenance Checklists

Browse More Checklists