Blasting Operations Safety

This Blasting Operations Safety ensures systematic verification and compliance with OSHA 1926.900-914, ATF requirements. Complete all sections to maintain safety, quality, and regulatory compliance. Document all findings and initiate corrective actions as required.

  • Industry: Construction
  • Frequency: Per operation
  • Estimated Time: 20-30 minutes
  • Role: Blaster
  • Total Items: 37
  • Compliance: OSHA 1926.900-914, ATF

Pre-Inspection Verification

Initial setup and documentation review before inspection.

  • Previous inspection records reviewed?
  • Inspection scope and areas defined?
  • Required PPE available and worn?
  • Inspection tools and forms ready?

Regulatory Compliance Verification

Verify compliance with applicable standards and regulations.

  • Required permits current and posted?
  • Training records current for personnel?
  • Written procedures available at point of use?
  • Required documentation maintained?
  • Required signage properly displayed?

Physical Inspection

Visual and physical inspection of equipment and areas.

  • Overall condition acceptable?
  • No visible damage or defects?
  • Safety guards and barriers in place?
  • Housekeeping standards maintained?
  • Emergency equipment accessible?
  • Exits and egress routes clear?

Operational Verification

Functional testing and operational verification.

  • Equipment operating properly?
  • Safety devices and interlocks functional?
  • Monitoring equipment calibrated?
  • No unusual conditions observed?

Findings and Corrective Actions

Document findings and assign corrective actions.

  • All deficiencies documented?
  • Corrective actions assigned with due dates?
  • Any immediate hazards addressed?
  • Photos of significant findings attached?
  • Overall Inspection Rating
  • Additional Notes and Recommendations
  • Emergency exits unobstructed and properly marked?
  • First aid supplies stocked and accessible?
  • Fire extinguisher accessible and inspection current?
  • All identified hazards documented and controlled?
  • ...and 4 more items

PPE Compliance Verification

Personal protective equipment inspection

  • Hard hats worn in required areas?
  • Safety glasses/goggles worn as required?
  • High-visibility vests worn?
  • Steel-toe boots worn by all workers?

Related Construction Checklists

Related Safety Inspections Checklists

Browse More Checklists