HSE Construction Site Daily Safety Inspection Checklist
This checklist covers compliance with Construction (Design and Management) Regulations 2015 (CDM 2015) and applicable UK statutory requirements for construction operations. Non-compliance can result in unlimited fines and up to two years imprisonment under CDM Regulations 2015 and HSWA 1974 Section 33.
- Industry: Construction
- Frequency: Daily
- Estimated Time: 20-30 minutes
- Role: Site Manager
- Total Items: 20
- Compliance: Construction (Design and Management) Regulations 2015 (CDM 2015), Health and Safety at Work etc. Act 1974, BS EN 13374, Work at Height Regulations 2005
CDM 2015 Statutory Duties & Notification
Verify Principal Designer appointment, Construction Phase Plan, and HSE F10 notification per CDM 2015.
- Is a Principal Designer appointed in writing for notifiable projects requiring F10 notification to HSE?
- Is the Construction Phase Plan (CPP) prepared, suitable, and communicated to all workers?
- Is an F10 HSE notification submitted (or confirmed not required for non-notifiable works)?
- Attach photo of F10 notification, Construction Phase Plan, and Principal Designer appointment letter:
Pre-Construction Information, Welfare & Induction
Verify pre-construction surveys, welfare provision, and site induction compliance per CDM 2015.
- Are pre-construction surveys (asbestos, ground investigation, services) completed before work starts?
- Is a welfare provision plan in place providing toilets, washing facilities, rest area, and drinking water?
- Is site induction conducted for all workers before they begin work on site?
- Attach photo of pre-construction surveys, welfare facilities inspection, and site induction register:
Temporary Works, Scaffold & CDM File
Verify temporary works design, scaffold inspection, and CDM Health and Safety File compliance.
- Are all temporary works (excavations, propping, falsework) designed, inspected, and certified?
- Is the scaffold inspection register up to date (7-day intervals or after adverse weather)?
- Overall CDM and site safety compliance assessment:
- Attach photo of scaffold inspection tags, temporary works design, and CDM health and safety file:
H&S File, RIDDOR Reporting & Project Closeout
Verify H&S File compilation, RIDDOR incident reporting, and project closeout compliance per CDM 2015.
- Is the Health and Safety File being compiled by the Principal Designer and ready for handover at project completion?
- Is a record of RIDDOR-reportable incidents maintained and reportable incidents submitted to HSE online?
- Number of RIDDOR-reportable incidents on this project to date:
- Principal Contractor or Site Manager certification of inspection:
Corrective Actions & Inspector Sign-Off
Document all deficiencies and assign corrective actions. POPProbe auto-assigns these to team members, generates a signed PDF report instantly, and tracks compliance status across all locations. -> Start free, no credit card required
- List all deficiencies identified in this inspection:
- Overall compliance status?
- Corrective actions assigned to (name and department):
- Inspector digital signature and date:
Related Uk Construction Safety Checklists
- CDM 2015 & Local Authority Construction Hoarding Safety Inspection
- HSE Construction Division Site Inspection Preparation Checklist
- CDM 2015 & PUWER 1998 Construction Site Daily Safety Walk Inspection
- CAR 2012 Refurbishment & Demolition Asbestos Survey Compliance
- WAH 2005 & IPAF Aerial Work Platform Pre-Use Safety Inspection
- WAH 2005 Podium Steps & Low Level Work Platform Safety Checklist
- WAH 2005 & CDM 2015 Rooftop Solar Panel Installation Safety Audit
- CDM 2015 & BS 6187 Demolition Pre-Construction Safety Plan Audit
Related Site Safety Checklists
- UK HSE Construction Site Safety Checklist - FREE Download
- UK Scaffolding Inspection Checklist - FREE Download
- UK Working at Height Risk Assessment Checklist - FREE Download
- UK Asbestos Management Survey Checklist - FREE Download
- UK Construction Phase Plan Checklist - FREE Download
- UK Health & Safety File Checklist - FREE Download
- UK Demolition Safety Inspection Checklist - FREE Download
- UK Hot Work Permit Checklist - FREE Download
- UK Tower Crane Inspection Checklist - FREE Download
- UK MEWP Pre-Use Inspection Checklist - FREE Download
Why Use This HSE Construction Site Daily Safety Inspection Checklist?
This hse construction site daily safety inspection checklist helps construction teams maintain compliance and operational excellence. Designed for site manager professionals, this checklist covers 20 critical inspection points across 5 sections. Recommended frequency: daily.
Ensures compliance with Construction (Design and Management) Regulations 2015 (CDM 2015), Health and Safety at Work etc. Act 1974, BS EN 13374, Work at Height Regulations 2005. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What does the HSE Construction Site Daily Safety Inspection Checklist cover?
This checklist covers 20 inspection items across 5 sections: CDM 2015 Statutory Duties & Notification, Pre-Construction Information, Welfare & Induction, Temporary Works, Scaffold & CDM File, H&S File, RIDDOR Reporting & Project Closeout, Corrective Actions & Inspector Sign-Off. It is designed for construction operations and compliance.
How often should this checklist be completed?
This checklist should be completed daily. Each completion takes approximately 20-30 minutes.
Who should use this HSE Construction Site Daily Safety Inspection Checklist?
This checklist is designed for Site Manager professionals in the construction industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.
Can I download this checklist as a PDF?
Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.