Oil & Gas Facility Operations Safety Checklist #39

This checklist supports safe operation of oil and gas facilities, including production, processing, and storage sites. It helps operations teams verify process safety management controls, hazardous area classification, LOTO, confined space entry, fire protection, and emergency response in alignment with OSHA PSM, API standards, and NFPA codes.

  • Industry: Energy & Utilities
  • Frequency: Daily (each shift)
  • Estimated Time: 30-45 minutes
  • Role: Oil & Gas Operations Supervisor / Site Safety Manager
  • Total Items: 35
  • Compliance: OSHA 29 CFR 1910.119 Process Safety Management (PSM), OSHA 29 CFR 1910.147 Control of Hazardous Energy (LOTO), OSHA 29 CFR 1910.146 Permit-Required Confined Spaces, API Recommended Practice 750 Management of Process Hazards, NFPA 30 Flammable and Combustible Liquids Code

Process Safety Management (PSM)

Verify PSM elements for covered processes.

  • Process Safety Information (PSI) available and current?
  • Process Hazard Analysis (PHA) current and action items tracked?
  • Operating procedures current and accessible?
  • Photo of P&ID/procedure binder
  • PSM notes

Hazardous Area Classification & Controls

Confirm controls for classified locations and ignition sources.

  • Hazardous areas classified and marked?
  • Electrical equipment appropriately rated?
  • Bonding and grounding in place?
  • Photo of classified area signage
  • Hazardous area notes

Energy Isolation & LOTO

Verify isolation of hazardous energy sources.

  • LOTO procedures followed for maintenance?
  • Isolation verified before work?
  • Locks/tags legible and uniquely identified?
  • Photo of applied LOTO devices
  • LOTO notes

Confined Space Entry

Confirm permit-required confined space controls.

  • Confined spaces identified and inventoried?
  • Entry permit completed and authorized?
  • Atmospheric testing conducted and within limits?
  • Photo of confined space signage
  • Confined space notes

Fire Protection & Emergency Systems

Verify fire detection, suppression, and preparedness.

  • Fire detection/suppression systems operational?
  • Fire extinguishers accessible and inspected?
  • Fire water systems available and tested?
  • Photo of fire protection equipment
  • Fire protection notes

Environmental & Spill Controls

Assess environmental protection and spill prevention.

  • Secondary containment intact?
  • Spill kits stocked and accessible?
  • Waste handled per procedure?
  • Photo of containment/spill kit
  • Environmental notes

Incident Reporting & QAPI

Log incidents and corrective actions.

  • Incidents and near misses logged?
  • Root cause analysis completed when required?
  • Corrective actions tracked to closure?
  • Photo evidence (if applicable)
  • Incident notes

Related Infrastructure Checklists

Related Oil Gas Facility Checklists

Why Use This Oil & Gas Facility Operations Safety Checklist #39?

This oil & gas facility operations safety checklist #39 helps energy & utilities teams maintain compliance and operational excellence. Designed for oil & gas operations supervisor / site safety manager professionals, this checklist covers 35 critical inspection points across 7 sections. Recommended frequency: daily (each shift).

Ensures compliance with OSHA 29 CFR 1910.119 Process Safety Management (PSM), OSHA 29 CFR 1910.147 Control of Hazardous Energy (LOTO), OSHA 29 CFR 1910.146 Permit-Required Confined Spaces, API Recommended Practice 750 Management of Process Hazards, NFPA 30 Flammable and Combustible Liquids Code, NFPA 54/58 Fuel Gas and LPG Codes (as applicable). Regulatory-aligned for audit readiness and inspection documentation.

Frequently Asked Questions

What is a Oil & Gas Facility Operations Safety Checklist #39?

A Oil & Gas Facility Operations Safety Checklist #39 is a standardized inspection form used by oil & gas operations supervisor / site safety manager to ensure consistent energy & utilities operations. It contains 45 inspection points organized into 7 sections. FREE oil and gas facility operations safety checklist PDF download. OSHA PSM, API, and NFPA aligned. Oil & Gas Facility Operations Safety Checklist #39. Download FREE template now.

How often should I use this energy & utilities checklist?

This checklist is designed to be completed daily (each shift). Regular use ensures compliance with OSHA 29 CFR 1910.119 Process Safety Management (PSM) and OSHA 29 CFR 1910.147 Control of Hazardous Energy (LOTO) and helps identify issues before they become problems.

Can I download this Oil & Gas Facility Operations Safety Checklist #39 as a PDF?

Yes, you can download this checklist as a FREE PDF for printing or offline use. The checklist includes 45 fields across 7 sections and typically takes 30-45 minutes to complete.

What compliance standards does this checklist cover?

This checklist helps ensure compliance with OSHA 29 CFR 1910.119 Process Safety Management (PSM), OSHA 29 CFR 1910.147 Control of Hazardous Energy (LOTO), OSHA 29 CFR 1910.146 Permit-Required Confined Spaces, API Recommended Practice 750 Management of Process Hazards, NFPA 30 Flammable and Combustible Liquids Code, NFPA 54/58 Fuel Gas and LPG Codes (as applicable). Following these standards protects your organization and ensures best practices.

How do I complete this energy & utilities inspection checklist?

Begin by completing the header fields for Facility Name, Inspection Date, Inspector Name, Facility Type, Process Units Active?, and Hot Work Planned Today?. Work through each of the 7 sections, marking items Yes or No as applicable. Add notes for any issues found. Finally, complete the footer fields and add your signature. The entire process takes approximately 30 to 45 minutes.

What are the key sections in this energy & utilities checklist?

This energy & utilities checklist is organized into 7 key sections: Process Safety Management (PSM), Hazardous Area Classification & Controls, Energy Isolation & LOTO, Confined Space Entry, Fire Protection & Emergency Systems, Environmental & Spill Controls, Incident Reporting & QAPI. Each section contains specific inspection points that oil & gas operations supervisor / site safety manager must verify. The structured layout ensures nothing is missed during energy & utilities inspections and makes the process efficient, typically taking 30-45 minutes to complete.

Who should use this Oil & Gas Facility Operations Safety Checklist #39?

This checklist is primarily designed for oil & gas operations supervisor / site safety manager working in energy & utilities operations. However, it is also valuable for quality assurance teams, safety officers, compliance managers, and supervisors who need to verify that energy & utilities standards are being met. Organizations of all sizes can benefit from using this Oil & Gas Facility Operations Safety Checklist #39 to maintain consistency and accountability.

Browse More Checklists

POPProbe