5G NR RF Drive Test and Coverage Verification Checklist
This 5G NR drive test and coverage verification checklist ensures compliance with 3GPP TS 38.133 NR Requirements for Radio Resource Management, GSMA NR Coverage KPI Guidelines, and ETSI TS 138 101-1 NR User Equipment Radio Transmission. Designed for RF engineers and drive test technicians to document network quality and identify optimization needs.
- Industry: Telecommunications & IT
- Frequency: Per Optimization or Acceptance Test
- Estimated Time: Variable (per test route)
- Role: RF Engineer / Drive Test Technician
- Total Items: 16
- Compliance: 3GPP TS 38.133 NR Requirements for RRM Support, 3GPP TS 38.101-1 NR UE Radio Transmission and Reception, GSMA NG.116 Generic Network Slice Template KPIs, ETSI TS 138 141-1 NR Base Station Conformance, FCC Part 22/24/27 Wireless Service Rules
Coverage and Signal Strength (RSRP)
Reference Signal Received Power measurements across test area.
- RSRP ≥ -110 dBm across target coverage area?
- Coverage holes documented with GPS coordinates?
- Average RSRP measured (dBm)
- In-building coverage objectives met at primary locations?
Signal Quality (SINR and RSRQ)
Signal-to-interference plus noise ratio measurements.
- SINR ≥ 0 dB in majority of test route?
- RSRQ ≥ -13 dB in coverage area?
- Average SINR measured (dB)
- Interference sources identified and documented?
Data Throughput Performance
Downlink and uplink throughput against carrier KPI targets.
- Average DL throughput meets carrier KPI target?
- Average downlink throughput measured (Mbps)
- Average UL throughput meets carrier KPI target?
- End-to-end latency below 20ms?
Mobility and Handover Performance
Inter-cell handover success and call/session drop rates.
- Handover success rate ≥ 98%?
- Data session drop rate below 1%?
- Handover failure locations GPS-logged for optimization?
- Drive Test Summary and Optimization Recommendations
Related IT & Data Security Checklists
- 5G Core Network Security Assessment Checklist
- 5G Network Slicing SLA and QoS Configuration Audit Checklist
- 5G Spectrum Management and Interference Audit Checklist
- 5G Cell Site Acquisition and Zoning Compliance Checklist
- ISO 27001:2022 ISMS Internal Audit Checklist
- SOC 2 Type II Audit Readiness Assessment Checklist
- PCI DSS v4.0 Compliance Self-Assessment Checklist
- Zero Trust Architecture Maturity Assessment Checklist
Related Telecom Checklists
- 5G Cell Tower Safety and Annual Structural Inspection Checklist - FREE Download
- 5G Small Cell Installation and Commissioning Checklist - FREE Download
- 5G Core Network Security Assessment Checklist - FREE Download
- 5G Network Slicing SLA and QoS Configuration Audit Checklist - FREE Download
- 5G Spectrum Management and Interference Audit Checklist - FREE Download
- 5G Cell Site Acquisition and Zoning Compliance Checklist - FREE Download
- Fiber Optic Splicing Quality and Compliance Checklist - FREE Download
- OTDR Acceptance Test and Fiber Link Certification Checklist - FREE Download
- Aerial Fiber Cable Installation and Lashing Checklist - FREE Download
- Underground Fiber Conduit Installation and OSP Checklist - FREE Download
Why Use This 5G NR RF Drive Test and Coverage Verification Checklist?
This 5g nr rf drive test and coverage verification checklist helps telecommunications & it teams maintain compliance and operational excellence. Designed for rf engineer / drive test technician professionals, this checklist covers 16 critical inspection points across 4 sections. Recommended frequency: per optimization or acceptance test.
Ensures compliance with 3GPP TS 38.133 NR Requirements for RRM Support, 3GPP TS 38.101-1 NR UE Radio Transmission and Reception, GSMA NG.116 Generic Network Slice Template KPIs, ETSI TS 138 141-1 NR Base Station Conformance, FCC Part 22/24/27 Wireless Service Rules. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What is a 5G NR RF Drive Test and Coverage Verification Checklist?
A 5G NR RF Drive Test and Coverage Verification Checklist is a standardized inspection form used by rf engineer / drive test technician to ensure consistent telecommunications & it operations. It contains 21 inspection points organized into 4 sections. FREE 5G NR RF drive test and coverage verification checklist PDF. RSRP, RSRQ, SINR, throughput, handover success rate, and latency KPIs per 3GPP TS 38.133, GSMA, ETSI, and carrier acceptance criteria. 28+ drive test verification checks. Download FREE template now.
How often should I use this telecommunications & it checklist?
This checklist is designed to be completed per optimization or acceptance test. Regular use ensures compliance with 3GPP TS 38.133 NR Requirements for RRM Support and 3GPP TS 38.101-1 NR UE Radio Transmission and Reception and helps identify issues before they become problems.
Can I download this 5G NR RF Drive Test and Coverage Verification Checklist as a PDF?
Yes, you can download this checklist as a FREE PDF for printing or offline use. The checklist includes 21 fields across 4 sections and typically takes variable (per test route) to complete.
What compliance standards does this checklist cover?
This checklist helps ensure compliance with 3GPP TS 38.133 NR Requirements for RRM Support, 3GPP TS 38.101-1 NR UE Radio Transmission and Reception, GSMA NG.116 Generic Network Slice Template KPIs, ETSI TS 138 141-1 NR Base Station Conformance, FCC Part 22/24/27 Wireless Service Rules. Following these standards protects your organization and ensures best practices.
How do I complete this telecommunications & it inspection checklist?
Begin by completing the header fields for Market / City, Drive Test Date and Start Time, RF Engineer Name, Radio Technology Under Test, and Drive Test Software. Work through each of the 4 sections, marking items Yes or No as applicable. Add notes for any issues found. The entire process takes approximately variable (per test route).
What are the key sections in this telecommunications & it checklist?
This telecommunications & it checklist is organized into 4 key sections: Coverage and Signal Strength (RSRP), Signal Quality (SINR and RSRQ), Data Throughput Performance, Mobility and Handover Performance. Each section contains specific inspection points that rf engineer / drive test technician must verify. The structured layout ensures nothing is missed during telecommunications & it inspections and makes the process efficient, typically taking variable (per test route) to complete.
Who should use this 5G NR RF Drive Test and Coverage Verification Checklist?
This checklist is primarily designed for rf engineer / drive test technician working in telecommunications & it operations. However, it is also valuable for quality assurance teams, safety officers, compliance managers, and supervisors who need to verify that telecommunications & it standards are being met. Organizations of all sizes can benefit from using this 5G NR RF Drive Test and Coverage Verification Checklist to maintain consistency and accountability.