Aerial Lift Pre-Use Inspection Checklist

FREE aerial lift and boom lift pre-use inspection checklist with OSHA 1926.453 and ANSI A92 compliance. Covers controls, safety devices, structural components, and operator qualification. Multi-market standards for US OSHA/ANSI, UK LOLER, India IS standards, Brazil NR-18, Mexico NOM-009-STPS, and Colombia regulations. Download FREE PDF with 45+ inspection points.

  • Industry: Construction
  • Frequency: Before Each Use
  • Estimated Time: 15-20 minutes
  • Role: Operations Manager
  • Total Items: 29
  • Compliance: OSHA 1926.453, ANSI/SIA A92.5, A92.6, OSHA 1910.67, UK LOLER 1998, UK PUWER 1998

Operator Qualification

Verify operator training and authorization.

  • Operator trained on this specific equipment type?
  • Training current and documented?
  • Operator familiar with all controls?
  • Operator reviewed manufacturer's manual?

Ground Controls Inspection

Verify ground-level controls and emergency systems.

  • Ground controls functional?
  • Emergency stop (E-stop) functional?
  • Control function labels legible?
  • Key switch and ignition functional?

Platform & Basket Inspection

Verify platform controls and safety features.

  • Platform controls responsive and functional?
  • Guardrails secure and in place?
  • Entry gate/chain secured properly?
  • Platform floor clean and non-slip?
  • Capacity plate visible and legible?
  • Lanyard anchor points present and secure?

Structural & Hydraulic Systems

Verify structural integrity and hydraulic operation.

  • No hydraulic leaks visible?
  • Hydraulic fluid level adequate?
  • No visible structural damage or cracks?
  • All pins and keepers in place?
  • All welds appear intact?

Power & Mobility Systems

Verify power source and drive systems.

  • Battery charge adequate for work?
  • Fuel level adequate (if engine-powered)?
  • Tires/wheels in good condition?
  • Brakes holding properly?
  • Horn and motion alarm working?
  • Pothole guards functional (scissor lifts)?

PPE Compliance Verification

Personal protective equipment inspection

  • Hard hats worn in required areas?
  • Safety glasses/goggles worn as required?
  • High-visibility vests worn?
  • Steel-toe boots worn by all workers?

Related Construction Checklists

Related Aerial Lifts Checklists

Browse More Checklists