Mexico NOM-001-STPS Building Safety Checklist

Comprehensive Mexico NOM-001-STPS building and facility safety checklist covering structural integrity, emergency routes, ventilation, and illumination requirements per Mexican federal workplace standards.

Industry: Construction
Frequency: Annual
Estimated Time: 45-60 minutes
Role: Inspector de Seguridad/Responsable de Instalaciones
Total Items: 48
Compliance: NOM-001-STPS-2008, Reglamento Federal de Seguridad y Salud en el Trabajo

Condiciones Estructurales

Structural conditions

¿Cimientos y estructura estables?
¿Techos sin daños ni filtraciones?
¿Pisos en buenas condiciones?
¿Paredes sin grietas peligrosas?

Rutas de Evacuación

Emergency routes

¿Rutas de evacuación señalizadas?
¿Salidas de emergencia sin obstrucciones?
¿Puertas de emergencia abren hacia afuera?
¿Iluminación de emergencia funcional?

Ventilación e Iluminación

Ventilation and lighting

¿Ventilación natural o artificial adecuada?
¿Iluminación suficiente (300 lux mín.)?
¿Temperatura de confort térmico?

Servicios e Instalaciones

Services and facilities

¿Sanitarios suficientes por trabajadores?
¿Agua potable disponible?
¿Botiquín de primeros auxilios?

Prevención de Incendios

Fire prevention

¿Extintores con carga vigente?
¿Extintores accesibles y señalizados?
¿Detectores de humo funcionales?

Áreas de Trabajo

Work areas

¿Orden y limpieza en áreas de trabajo?
¿Espacios de circulación libres (≥80 cm)?
¿Almacenamiento seguro de materiales?

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

Inspector Name
Inspection Date
Project Name / Job Number
Current Weather Conditions
Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

Site safety plan posted and accessible?
All required permits current and displayed?
SDS/MSDS sheets available for all chemicals on site?
First aid supplies accessible and stocked?
Emergency contact information posted?

Personal Protective Equipment (PPE)

Verify all personnel have and are using appropriate PPE

Hard hats worn by all personnel?
Safety glasses/eye protection in use?
High-visibility vests worn where required?
Steel-toe/safety footwear worn?
PPE in good condition (no damage)?

Site Conditions & Housekeeping

General site conditions and housekeeping standards

Walkways and access routes clear of debris?
Adequate lighting in all work areas?
Trip hazards identified and addressed?
Waste properly contained and removed?

Equipment & Tools Condition

Verify all equipment and tools are in safe working condition

All equipment pre-use inspected today?
Machine guards in place and functional?
Electrical cords and connections in good condition?
Any defective tools removed from service?

Documentation & Sign-Off

Complete inspection documentation and corrective actions

All deficiencies documented with photos?
Corrective actions assigned with deadlines?
Supervisor notified of critical findings?
Inspector Signature
Additional Notes / Observations