Mexico CFE Electrical Installation Checklist

Comprehensive Mexico CFE electrical installation checklist covering NOM-001-SEDE requirements and utility connection standards.

Industry: Construction
Frequency: Annual
Estimated Time: 45-60 minutes
Role: Ingeniero Electricista/UVIE
Total Items: 47
Compliance: NOM-001-SEDE-2012, CFE Requirements, Ley de la Industria Eléctrica

Acometida y Medición

Service entrance and metering

¿Acometida conforme a especificaciones CFE?
¿Medidor instalado correctamente?
¿Sellos de CFE intactos?

Tableros y Protecciones

Panels and protections

¿Tablero principal conforme NOM-001?
¿Interruptores certificados NOM?
¿Capacidad de interruptores adecuada?
¿Circuitos identificados en tablero?

Canalizaciones

Conduits

¿Tuberías conforme a norma?
¿Calibres de conductores correctos?
¿Códigos de colores respetados?

Sistema de Tierras

Grounding system

¿Electrodo de tierra instalado?
¿Resistencia de tierra medida (<25 ohms)?
¿Conexiones de tierra completas?

Cargas Especiales

Special loads

¿Motores con protección adecuada?
¿A/C con circuitos dedicados?
¿Factor de potencia dentro de rango?

Documentación

Documentation

¿Diagrama unifilar actualizado?
¿Dictamen UVIE (si aplica)?
¿Memoria de cálculo disponible?

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

Inspector Name
Inspection Date
Project Name / Job Number
Current Weather Conditions
Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

Site safety plan posted and accessible?
All required permits current and displayed?
SDS/MSDS sheets available for all chemicals on site?
First aid supplies accessible and stocked?
Emergency contact information posted?

Personal Protective Equipment (PPE)

Verify all personnel have and are using appropriate PPE

Hard hats worn by all personnel?
Safety glasses/eye protection in use?
High-visibility vests worn where required?
Steel-toe/safety footwear worn?
PPE in good condition (no damage)?

Site Conditions & Housekeeping

General site conditions and housekeeping standards

Walkways and access routes clear of debris?
Adequate lighting in all work areas?
Trip hazards identified and addressed?
Waste properly contained and removed?

Equipment & Tools Condition

Verify all equipment and tools are in safe working condition

All equipment pre-use inspected today?
Machine guards in place and functional?
Electrical cords and connections in good condition?
Any defective tools removed from service?

Documentation & Sign-Off

Complete inspection documentation and corrective actions

All deficiencies documented with photos?
Corrective actions assigned with deadlines?
Supervisor notified of critical findings?
Inspector Signature
Additional Notes / Observations