Construction Electrical Rough-In Inspection Checklist
Comprehensive electrical rough-in inspection checklist for construction electrical systems.
- Industry: Construction
- Frequency: Per phase
- Estimated Time: 20-30 minutes
- Role: Electrical Inspector
- Total Items: 23
- Compliance: NEC, IBC, Project Specifications
Wiring Methods
Cables and conduit
- Wiring method per plans?
- Conductor sizing correct?
- Cables protected from physical damage?
Boxes
Device and junction boxes
- Box fill calculations acceptable?
- Boxes properly secured?
Grounding
Equipment grounding
- Equipment grounding conductors installed?
- Bonding jumpers where required?
Branch Circuits
Circuit requirements
- AFCI protection where required?
- GFCI protection where required?
- Dedicated circuits provided where required?
PPE Compliance
PPE inspection
- Hard hats worn?
- Safety glasses worn?
- High-vis vests worn?
- Steel-toe boots worn?
Fall Protection
OSHA 1926 Subpart M
- Fall protection above 6 feet?
- Guardrails intact?
- Harnesses inspected?
Housekeeping & Organization
Site organization
- Walkways clear?
- Materials stored safely?
- Debris removed?
Electrical Safety
OSHA 1926 Subpart K
- GFCI protection on circuits?
- Extension cords good?
- Lockout/tagout followed?
Related Construction Checklists
- Construction Portable Generator Inspection Checklist
- Construction Electrical Grounding Bonding Inspection Checklist
- Construction Lockout Tagout Verification Checklist
- Construction Temporary Power Panel Inspection Checklist
- Construction Elevator Installation Inspection Checklist
- Construction Erosion Control Inspection Checklist
- Construction Excavator Daily Inspection Checklist
- Construction Exterior Cladding Installation Inspection Checklist
Related Electrical Safety Checklists
- Electrical Panel Lockout/Tagout Checklist - FREE Download
- Portable Electrical Equipment Grounding Test - FREE PDF - FREE Download
- Temporary Power Installation Inspection - FREE PDF - FREE Download
- Construction Electrical Extension Cord Inspection Checklist - FREE Download
- Construction Portable Generator Inspection Checklist - FREE Download
- Construction Electrical Grounding Bonding Inspection Checklist - FREE Download
- Construction Lockout Tagout Verification Checklist - FREE Download
- Construction Temporary Power Panel Inspection Checklist - FREE Download
- India Electrical Safety Inspection Checklist - FREE Download
- Brazil NR-10 Electrical Safety Checklist - FREE Download
Why Use This Construction Electrical Rough-In Inspection Checklist?
This construction electrical rough-in inspection checklist helps construction teams maintain compliance and operational excellence. Designed for electrical inspector professionals, this checklist covers 23 critical inspection points across 8 sections. Recommended frequency: per phase.
Ensures compliance with NEC, IBC, Project Specifications. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What does the Construction Electrical Rough-In Inspection Checklist cover?
This checklist covers 23 inspection items across 8 sections: Wiring Methods, Boxes, Grounding, Branch Circuits, PPE Compliance, Fall Protection, Housekeeping & Organization, Electrical Safety. It is designed for construction operations and compliance.
How often should this checklist be completed?
This checklist should be completed per phase. Each completion takes approximately 20-30 minutes.
Who should use this Construction Electrical Rough-In Inspection Checklist?
This checklist is designed for Electrical Inspector professionals in the construction industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.
Can I download this checklist as a PDF?
Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.