India Electrical Safety Inspection Checklist

Comprehensive India electrical safety inspection checklist.

  • Industry: Construction
  • Frequency: Annual
  • Estimated Time: 45-60 minutes
  • Role: Electrical Engineer/Licensed Contractor
  • Total Items: 22
  • Compliance: Indian Electricity Act 2003, Indian Electricity Rules 1956, IS 732, CEA Regulations

Installation

Wiring condition

  • Wiring as per IS standards?
  • Insulation in good condition?
  • Earthing proper (< 1 ohm)?

Protection Devices

Safety devices

  • MCB/ELCB installed and working?
  • Fuses properly rated?
  • Surge protection if required?

HV Installation

High voltage (if applicable)

  • Transformer room secure?
  • Transformer oil testing done?
  • Danger boards displayed?

General Safety

Overall safety

  • Distribution boards accessible?
  • No loose connections?
  • Fire extinguisher (CO2) available?

PPE Compliance Verification

Personal protective equipment inspection

  • Hard hats worn in required areas?
  • Safety glasses/goggles worn as required?
  • High-visibility vests worn?
  • Steel-toe boots worn by all workers?

Fall Protection & Working at Heights

OSHA 1926 Subpart M fall protection

  • Fall protection used above 6 feet?
  • Guardrails intact and properly installed?
  • Harnesses inspected before use?

Housekeeping & Site Organization

Worksite cleanliness and organization

  • Walkways and access routes clear?
  • Materials stored safely and secured?
  • Debris and waste removed regularly?

Related Construction Checklists

Related Electrical Safety Checklists

Browse More Checklists