Construction Electrical Extension Cord Inspection Checklist
Comprehensive electrical extension cord and temporary wiring inspection checklist for construction sites.
- Industry: Construction
- Frequency: Before each use
- Estimated Time: 5-10 minutes
- Role: Electrician/User
- Total Items: 30
- Compliance: OSHA 1926.405, NFPA 70E, OSHA 1926.416
Cord Condition
Physical inspection
- Outer jacket intact (no cuts, abrasions)?
- No splices or tape repairs?
- Strain relief intact at connections?
Plugs/Connectors
End connections
- Male plug intact?
- Ground prong present (not removed)?
- Female end intact (no exposed conductors)?
GFCI Protection
Ground fault protection
- GFCI protection provided?
- GFCI tested and working?
Proper Usage
Safe use practices
- Not overloaded (within amperage rating)?
- Not buried under debris?
- Protected from traffic/damage?
Pre-Inspection Setup & Documentation
Initial documentation and site preparation verification
- Inspector Name
- Inspection Date
- Project Name / Job Number
- Current Weather Conditions
- Previous inspection findings reviewed?
Safety & Compliance Verification
Verify compliance with applicable OSHA regulations and site safety plan
- Site safety plan posted and accessible?
- All required permits current and displayed?
- SDS/MSDS sheets available for all chemicals on site?
- First aid supplies accessible and stocked?
- Emergency contact information posted?
Personal Protective Equipment (PPE)
Verify all personnel have and are using appropriate PPE
- Hard hats worn by all personnel?
- Safety glasses/eye protection in use?
- High-visibility vests worn where required?
- Steel-toe/safety footwear worn?
- PPE in good condition (no damage)?
Site Conditions & Housekeeping
General site conditions and housekeeping standards
- Walkways and access routes clear of debris?
- Adequate lighting in all work areas?
- Trip hazards identified and addressed?
- Waste properly contained and removed?
Related Construction Checklists
- Construction Electrical Rough-In Inspection Checklist
- Construction Portable Generator Inspection Checklist
- Construction Electrical Grounding Bonding Inspection Checklist
- Construction Lockout Tagout Verification Checklist
- Construction Confined Space Entry Permit Checklist
- Construction Demolition Daily Safety Checklist
- Construction Anchor Bolt Installation Inspection Checklist
- Construction Asbestos Abatement Daily Safety Checklist
Related Electrical Safety Checklists
- Electrical Panel Lockout/Tagout Checklist - FREE Download
- Portable Electrical Equipment Grounding Test - FREE PDF - FREE Download
- Temporary Power Installation Inspection - FREE PDF - FREE Download
- Construction Electrical Rough-In Inspection Checklist - FREE Download
- Construction Portable Generator Inspection Checklist - FREE Download
- Construction Electrical Grounding Bonding Inspection Checklist - FREE Download
- Construction Lockout Tagout Verification Checklist - FREE Download
- Construction Temporary Power Panel Inspection Checklist - FREE Download
- India Electrical Safety Inspection Checklist - FREE Download
- Brazil NR-10 Electrical Safety Checklist - FREE Download
Why Use This Construction Electrical Extension Cord Inspection Checklist?
This construction electrical extension cord inspection checklist helps construction teams maintain compliance and operational excellence. Designed for electrician/user professionals, this checklist covers 30 critical inspection points across 8 sections. Recommended frequency: before each use.
Ensures compliance with OSHA 1926.405, NFPA 70E, OSHA 1926.416. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What does the Construction Electrical Extension Cord Inspection Checklist cover?
This checklist covers 30 inspection items across 8 sections: Cord Condition, Plugs/Connectors, GFCI Protection, Proper Usage, Pre-Inspection Setup & Documentation, Safety & Compliance Verification, Personal Protective Equipment (PPE), Site Conditions & Housekeeping. It is designed for construction operations and compliance.
How often should this checklist be completed?
This checklist should be completed before each use. Each completion takes approximately 5-10 minutes.
Who should use this Construction Electrical Extension Cord Inspection Checklist?
This checklist is designed for Electrician/User professionals in the construction industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.
Can I download this checklist as a PDF?
Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.