Mexico NOM-019-STPS Electrical Safety Inspection
Comprehensive Mexico NOM-019-STPS electrical safety inspection checklist for workplace electrical systems and installations.
- Industry: Construction
- Frequency: Annual
- Estimated Time: 45-60 minutes
- Role: Técnico Electricista/Supervisor de Mantenimiento
- Total Items: 31
- Compliance: NOM-019-STPS-2011, NOM-001-SEDE-2012
Condiciones Generales
General conditions
- ¿Diagrama unifilar actualizado?
- ¿Tableros identificados?
- ¿Canalizaciones en buen estado?
Protecciones Eléctricas
Electrical protections
- ¿Interruptores termomagnéticos funcionales?
- ¿Fusibles del calibre correcto?
- ¿Sistema de puesta a tierra?
Áreas Peligrosas
Hazardous areas
- ¿Áreas clasificadas según riesgo?
- ¿Equipo a prueba de explosión donde aplique?
Bloqueo de Energía
Energy lockout
- ¿Procedimiento LOTO eléctrico?
- ¿Candados y etiquetas disponibles?
Capacitación
Training
- ¿Solo personal calificado trabaja en sistemas eléctricos?
- ¿Capacitación en riesgos eléctricos?
Pre-Inspection Setup & Documentation
Initial documentation and site preparation verification
- Inspector Name
- Inspection Date
- Project Name / Job Number
- Current Weather Conditions
- Previous inspection findings reviewed?
Safety & Compliance Verification
Verify compliance with applicable OSHA regulations and site safety plan
- Site safety plan posted and accessible?
- All required permits current and displayed?
- SDS/MSDS sheets available for all chemicals on site?
- First aid supplies accessible and stocked?
- Emergency contact information posted?
Personal Protective Equipment (PPE)
Verify all personnel have and are using appropriate PPE
- Hard hats worn by all personnel?
- Safety glasses/eye protection in use?
- High-visibility vests worn where required?
- Steel-toe/safety footwear worn?
- PPE in good condition (no damage)?
Site Conditions & Housekeeping
General site conditions and housekeeping standards
- Walkways and access routes clear of debris?
- Adequate lighting in all work areas?
- Trip hazards identified and addressed?
- Waste properly contained and removed?
Related Construction Checklists
- Mexico CFE Electrical Installation Checklist
- Mexico Solar Panel Installation Safety Checklist
- Colombia Electrical Safety Checklist
- Colombia Solar Installation Safety Checklist
- Mexico NOM-033-STPS Confined Space Entry Checklist
- Mexico Construction Site Daily Safety Checklist
- Mexico Mining Safety Checklist
- Mexico Elevator Inspection Checklist
Related Electrical Safety Checklists
- Electrical Panel Lockout/Tagout Checklist - FREE Download
- Portable Electrical Equipment Grounding Test - FREE PDF - FREE Download
- Temporary Power Installation Inspection - FREE PDF - FREE Download
- Construction Electrical Extension Cord Inspection Checklist - FREE Download
- Construction Electrical Rough-In Inspection Checklist - FREE Download
- Construction Portable Generator Inspection Checklist - FREE Download
- Construction Electrical Grounding Bonding Inspection Checklist - FREE Download
- Construction Lockout Tagout Verification Checklist - FREE Download
- Construction Temporary Power Panel Inspection Checklist - FREE Download
- India Electrical Safety Inspection Checklist - FREE Download
Why Use This Mexico NOM-019-STPS Electrical Safety Inspection?
This mexico nom-019-stps electrical safety inspection helps construction teams maintain compliance and operational excellence. Designed for técnico electricista/supervisor de mantenimiento professionals, this checklist covers 31 critical inspection points across 9 sections. Recommended frequency: annual.
Ensures compliance with NOM-019-STPS-2011, NOM-001-SEDE-2012. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What should a Mexico NOM-019-STPS electrical inspection checklist include?
A NOM-019-STPS electrical inspection checklist should cover electrical installation compliance with NOM-001-SEDE (Mexico's electrical code), conductor insulation condition and overcurrent protection adequacy, grounding system continuity and resistance measurements, lockout/tagout (LOTO) procedure verification per NOM-029-STPS-2011, electrical panel labeling and arc flash marking, PPE availability and arc rating compliance for electrical workers, preventive maintenance log review for all electrical equipment, capacitor bank and power factor correction equipment condition, emergency lighting and exit sign battery backup test, equipment bonding for static-prone processes, and NOM-029 compliance training records for maintenance personnel. STPS inspectors verify NOM compliance during unannounced workplace inspections.
How often should NOM-019-STPS electrical inspections be completed?
NOM-029-STPS-2011 requires that preventive maintenance on electrical installations be performed at intervals defined in the employer's maintenance program, with documentation retained for 2 years. NOM-019-STPS-2011 Section 9 requires that employers conduct annual internal reviews of electrical installation compliance. The employer's Safety and Hygiene Commission (Comisión de Seguridad e Higiene) must conduct monthly workplace inspections per NOM-019-STPS Section 9.3, which include electrical safety. Verification Units (Unidades de Verificación) authorized by the STPS must perform NOM compliance verification at intervals specified in the applicable NOM - typically every 2 years for NOM-019 compliance certification.
What regulations govern electrical safety in Mexican workplaces?
NOM-019-STPS-2011 (Electrical Installations in Workplaces) is the primary standard governing workplace electrical safety in Mexico, implementing Article 132 of the Federal Labor Law (Ley Federal del Trabajo). NOM-029-STPS-2011 (Electrical Maintenance) sets requirements for maintenance programs and LOTO procedures. NOM-001-SEDE (Electrical Installations) is Mexico's national electrical code, aligned with IEC 60364. STPS (Secretaría del Trabajo y Previsión Social) enforces all workplace safety NOMs. SENER (Secretaría de Energía) governs energy sector-specific electrical standards. The Federal Labor Law Articles 472–512 establish penalties for OHS violations. IMSS (Instituto Mexicano del Seguro Social) regulations on occupational risk classification also affect electrical safety programs.
Who is qualified to conduct NOM-019-STPS electrical inspections?
NOM-019-STPS-2011 requires that electrical installations be designed, installed, and modified by DROs (Directores Responsables de Obra) or licensed electrical engineers (Ingenieros en Electrónica o Electricidad) registered with the state or federal authorities. Preventive maintenance per NOM-029-STPS-2011 must be performed by qualified electricians who have documented training in the maintenance tasks performed. STPS-authorized Verification Units (Unidades de Verificación, UVs) perform official NOM compliance certification. The employer's Safety and Hygiene Commission may include trained worker representatives who conduct monthly inspections under NOM-019. PROFEPA (environmental agency) may conduct inspections related to electrical safety for hazardous materials operations.
What are the consequences of failing a NOM-019-STPS electrical inspection?
STPS inspectors can impose fines from 250 to 5,000 times the daily minimum wage (approximately MXN $17,000–$340,000) for violations of NOM-019-STPS-2011 under Ley Federal del Trabajo Article 992. Willful violations causing worker injury or death can result in criminal prosecution under the Federal Penal Code. STPS can issue suspension orders (clausura temporal) requiring immediate cessation of electrical work pending compliance. Failure to register with IMSS or underreport electrical hazards that lead to workplace injuries results in increased IMSS premium adjustments. Non-compliance with NOM-001-SEDE in new construction prevents Comisión Federal de Electricidad (CFE) from providing electricity service connections until compliance is certified.
What is a Mexico NOM-019-STPS Electrical Safety Inspection?
A Mexico NOM-019-STPS Electrical Safety Inspection is a standardized inspection form used by técnico electricista/supervisor de mantenimiento to ensure consistent construction operations. It contains 36 inspection points organized into 9 sections. FREE Mexico NOM-019-STPS electrical safety checklist PDF. Seguridad en instalaciones eléctricas. Download FREE template now.
How often should I use this construction checklist?
This checklist is designed to be completed annual. Regular use ensures compliance with NOM-019-STPS-2011 and NOM-001-SEDE-2012 and helps identify issues before they become problems.
Can I download this Mexico NOM-019-STPS Electrical Safety Inspection as a PDF?
Yes, you can download this checklist as a FREE PDF for printing or offline use. The checklist includes 36 fields across 9 sections and typically takes 45-60 minutes to complete.
What compliance standards does this checklist cover?
This checklist helps ensure compliance with NOM-019-STPS-2011, NOM-001-SEDE-2012. Following these standards protects your organization and ensures best practices.
How do I complete this construction inspection checklist?
Begin by completing the header fields for Instalación/Edificio, Fecha, and Técnico. Work through each of the 9 sections, marking items Yes or No as applicable. Add notes for any issues found. Finally, complete the footer fields and add your signature. The entire process takes approximately 45 to 60 minutes.
What are the key sections in this construction checklist?
This construction checklist is organized into 9 key sections: Condiciones Generales, Protecciones Eléctricas, Áreas Peligrosas, Bloqueo de Energía, Capacitación, Pre-Inspection Setup & Documentation, Safety & Compliance Verification, Personal Protective Equipment (PPE), Site Conditions & Housekeeping. Each section contains specific inspection points that técnico electricista/supervisor de mantenimiento must verify. The structured layout ensures nothing is missed during construction inspections and makes the process efficient, typically taking 45-60 minutes to complete.
Who should use this Mexico NOM-019-STPS Electrical Safety Inspection?
This checklist is primarily designed for técnico electricista/supervisor de mantenimiento working in construction operations. However, it is also valuable for quality assurance teams, safety officers, compliance managers, and supervisors who need to verify that construction standards are being met. Organizations of all sizes can benefit from using this Mexico NOM-019-STPS Electrical Safety Inspection to maintain consistency and accountability.