Construction Fall Protection Harness Inspection Checklist
Comprehensive fall protection harness inspection checklist covering OSHA and ANSI requirements for personal fall arrest systems.
- Industry: Construction
- Frequency: Before each use
- Estimated Time: 5-10 minutes
- Role: Worker/Competent Person
- Total Items: 22
- Compliance: OSHA 1926.502, ANSI Z359.1, ANSI Z359.11, Manufacturer Guidelines
Labels/Documentation
Identification
- Labels legible?
- Within manufacturer's service life?
- Not previously used in fall arrest event?
Webbing
Strap condition
- No cuts or fraying?
- No burns or melting?
- No chemical damage or discoloration?
- No excessive abrasion?
Stitching
Thread condition
- All stitching intact?
- No broken or pulled threads?
Hardware
Metal components
- D-ring free of cracks and distortion?
- Buckles functioning properly?
- No excessive corrosion?
PPE Compliance
PPE inspection
- Hard hats worn?
- Safety glasses worn?
- High-vis vests worn?
- Steel-toe boots worn?
Fall Protection
OSHA 1926 Subpart M
- Fall protection above 6 feet?
- Guardrails intact?
- Harnesses inspected?
Housekeeping & Organization
Site organization
- Walkways clear?
- Materials stored safely?
- Debris removed?
Related Construction Checklists
- Daily Construction Site Safety Inspection
- Scaffolding Inspection Checklist
- Excavation & Trenching Safety Inspection
- Roofing Safety Inspection Checklist
- Crane & Lift Inspection Checklist
- Lockout/Tagout (LOTO) Procedure Checklist