Fall Protection Equipment Inspection Checklist

FREE fall protection equipment inspection checklist with OSHA 1926.502 and ANSI Z359 compliance. Covers harnesses, lanyards, SRLs, anchorages, and rescue equipment. Multi-market standards for US OSHA/ANSI, UK BS EN 361, India IS 3521, Brazil NR-35, Mexico NOM-009-STPS, and Colombia regulations. Download FREE PDF with 45+ inspection points.

Industry: Construction
Frequency: Before Each Use
Estimated Time: 10-20 minutes
Role: Operations Manager
Total Items: 33
Compliance: OSHA 29 CFR 1926.502 (Fall Protection Systems), OSHA 29 CFR 1926.503 (Training), ANSI Z359.1 (Full Body Harness), ANSI Z359.3 (SRLs), ANSI Z359.14 (SRDs)

Full Body Harness Inspection

ANSI Z359.1 harness inspection criteria.

Labels legible (manufacturer, model, date, standards)?
Webbing free of cuts, burns, fraying, abrasion?
Webbing free of chemical/paint contamination?
All stitching intact (no pulled, cut, or broken threads)?
Hardware (buckles, D-rings) undamaged and functional?
Dorsal D-ring in good condition?
All buckles engage and release properly?

Lanyard Inspection

Shock-absorbing lanyard inspection criteria.

Lanyard length correct for application (≤6 feet)?
Webbing/rope free of damage?
Shock absorber pack intact (not deployed)?
Snap hooks functional and self-locking?
All stitching and terminations secure?

Self-Retracting Lifeline (SRL) Inspection

ANSI Z359.14 SRL/SRD inspection criteria.

Housing undamaged (no cracks, dents, corrosion)?
Lifeline (cable/web) free of damage?
Retraction smooth with consistent tension?
Brake engages when lifeline pulled sharply?
Swivel and snap hook functioning properly?
Annual manufacturer inspection current?

Anchorage Point Inspection

OSHA 1926.502(d) anchorage requirements.

Anchorage rated for 5,000 lbs (or 2x MAF)?
Anchorage securely attached to structure?
Anchorage at or above dorsal D-ring height?
Anchorage connector compatible with system?
Swing fall hazards evaluated?

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

Inspector Name
Inspection Date
Project Name / Job Number
Current Weather Conditions
Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

Site safety plan posted and accessible?
All required permits current and displayed?
SDS/MSDS sheets available for all chemicals on site?
First aid supplies accessible and stocked?
Emergency contact information posted?