Construction Drilling Boring Equipment Inspection Checklist
Comprehensive drilling and boring equipment inspection checklist for drilled shafts and auger cast piles.
- Industry: Construction
- Frequency: Daily/Before each shift
- Estimated Time: 15-20 minutes
- Role: Drill Operator
- Total Items: 22
- Compliance: OSHA 1926.600, ADSC Guidelines, Manufacturer Guidelines
Drill Rig
Base machine
- Rig in good condition?
- Mast/derrick secure?
- Outriggers/pads functional?
Kelly Bar/Rotary
Drilling system
- Kelly bar in good condition?
- Rotary table working?
Drilling Tools
Augers/buckets
- Auger/bucket in good condition?
- Teeth/cutting edges acceptable?
Safety
Safety devices
- Guards in place?
- Emergency stop working?
PPE Compliance
PPE inspection
- Hard hats worn?
- Safety glasses worn?
- High-vis vests worn?
- Steel-toe boots worn?
Fall Protection
OSHA 1926 Subpart M
- Fall protection above 6 feet?
- Guardrails intact?
- Harnesses inspected?
Housekeeping & Organization
Site organization
- Walkways clear?
- Materials stored safely?
- Debris removed?
Electrical Safety
OSHA 1926 Subpart K
- GFCI protection on circuits?
- Extension cords good?
- Lockout/tagout followed?
Related Construction Checklists
- Construction Pile Driving Daily Inspection Checklist
- Construction Caisson Drilled Shaft Inspection Checklist
- Construction Pile Driving Daily Inspection Checklist
- Construction Dump Truck Daily Inspection Checklist
- Construction Dust Control Inspection Checklist
- Construction Electrical Rough-In Inspection Checklist
- Construction Elevator Installation Inspection Checklist
Related Foundation Checklists
- Construction Caisson Drilled Shaft Inspection Checklist - FREE Download
- Construction Pile Driving Daily Inspection Checklist - FREE Download