Construction Scaffold Erection Inspection Checklist

Comprehensive scaffold erection inspection checklist for supported scaffolds covering OSHA 1926 Subpart L requirements.

  • Industry: Construction
  • Frequency: After erection/Before use
  • Estimated Time: 20-30 minutes
  • Role: Competent Person
  • Total Items: 31
  • Compliance: OSHA 1926.451, OSHA 1926.452, OSHA 1926.454

Foundation/Base

Base support

  • Foundation firm and level?
  • Base plates in place?
  • Mudsills adequate (on soil)?
  • Screw jacks level and plumb?

Frame/Bracing

Structural components

  • Frames plumb and level?
  • Cross braces installed properly?
  • All connections secure?
  • No damaged components?

Platforms

Work platforms

  • Platforms fully planked?
  • Planks secured from movement?
  • Planks overlap minimum 12 inches on supports?
  • Planks in good condition?

Fall Protection

Guardrail system

  • Top rail at 38-45 inches?
  • Mid-rail installed?
  • Toeboards where required?

Access

Entry/exit

  • Safe access provided (ladder, stair, ramp)?

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

  • Inspector Name
  • Inspection Date
  • Project Name / Job Number
  • Current Weather Conditions
  • Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

  • Site safety plan posted and accessible?
  • All required permits current and displayed?
  • SDS/MSDS sheets available for all chemicals on site?
  • First aid supplies accessible and stocked?
  • Emergency contact information posted?

Personal Protective Equipment (PPE)

Verify all personnel have and are using appropriate PPE

  • Hard hats worn by all personnel?
  • Safety glasses/eye protection in use?
  • High-visibility vests worn where required?
  • Steel-toe/safety footwear worn?
  • PPE in good condition (no damage)?

Related Construction Checklists

Related Scaffolding Checklists

Browse More Checklists