Construction Concrete Formwork Inspection Checklist

Comprehensive concrete formwork and shoring inspection checklist covering OSHA 1926.703 requirements before concrete placement.

  • Industry: Construction
  • Frequency: Before each pour
  • Estimated Time: 20-30 minutes
  • Role: Superintendent/Competent Person
  • Total Items: 31
  • Compliance: OSHA 1926.703, ACI 347, OSHA 1926.701

Design/Documentation

Engineering

  • Shoring/reshoring designed by qualified person?
  • Formwork drawings on site?

Foundation/Support

Base support

  • Soil/slab can support loads?
  • Shoring plumb?
  • Base plates adequate?

Formwork

Form condition

  • Forms tight and secured?
  • Form ties properly installed?
  • Bracing adequate?
  • No damaged form materials?

Reinforcement

Rebar placement

  • Reinforcement placed per plans?
  • Rebar properly tied?
  • Impalement protection on rebar?

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

  • Inspector Name
  • Inspection Date
  • Project Name / Job Number
  • Current Weather Conditions
  • Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

  • Site safety plan posted and accessible?
  • All required permits current and displayed?
  • SDS/MSDS sheets available for all chemicals on site?
  • First aid supplies accessible and stocked?
  • Emergency contact information posted?

Personal Protective Equipment (PPE)

Verify all personnel have and are using appropriate PPE

  • Hard hats worn by all personnel?
  • Safety glasses/eye protection in use?
  • High-visibility vests worn where required?
  • Steel-toe/safety footwear worn?
  • PPE in good condition (no damage)?

Site Conditions & Housekeeping

General site conditions and housekeeping standards

  • Walkways and access routes clear of debris?
  • Adequate lighting in all work areas?
  • Trip hazards identified and addressed?
  • Waste properly contained and removed?

Related Construction Checklists

Related Concrete Masonry Checklists

Why Use This Construction Concrete Formwork Inspection Checklist?

This construction concrete formwork inspection checklist helps construction teams maintain compliance and operational excellence. Designed for superintendent/competent person professionals, this checklist covers 31 critical inspection points across 8 sections. Recommended frequency: before each pour.

Ensures compliance with OSHA 1926.703, ACI 347, OSHA 1926.701. Regulatory-aligned for audit readiness and inspection documentation.

Frequently Asked Questions

What is a Construction Concrete Formwork Inspection Checklist?

A Construction Concrete Formwork Inspection Checklist is a standardized inspection form used by superintendent/competent person to ensure consistent construction operations. It contains 38 inspection points organized into 8 sections. FREE concrete formwork inspection checklist PDF. OSHA 1926.703 compliant. Shoring design, bracing, form ties, pour preparation. Download FREE template now.

How often should I use this construction checklist?

This checklist is designed to be completed before each pour. Regular use ensures compliance with OSHA 1926.703 and ACI 347 and helps identify issues before they become problems.

Can I download this Construction Concrete Formwork Inspection Checklist as a PDF?

Yes, you can download this checklist as a FREE PDF for printing or offline use. The checklist includes 38 fields across 8 sections and typically takes 20-30 minutes to complete.

What compliance standards does this checklist cover?

This checklist helps ensure compliance with OSHA 1926.703, ACI 347, OSHA 1926.701. Following these standards protects your organization and ensures best practices.

How do I complete this construction inspection checklist?

Begin by completing the header fields for Project Name, Pour Location, Pour Type (slab, wall, column), Date, and Inspector Name. Work through each of the 8 sections, marking items Yes or No as applicable. Add notes for any issues found. Finally, complete the footer fields and add your signature. The entire process takes approximately 20 to 30 minutes.

What are the key sections in this construction checklist?

This construction checklist is organized into 8 key sections: Design/Documentation, Foundation/Support, Formwork, Reinforcement, Pre-Inspection Setup & Documentation, Safety & Compliance Verification, Personal Protective Equipment (PPE), Site Conditions & Housekeeping. Each section contains specific inspection points that superintendent/competent person must verify. The structured layout ensures nothing is missed during construction inspections and makes the process efficient, typically taking 20-30 minutes to complete.

Who should use this Construction Concrete Formwork Inspection Checklist?

This checklist is primarily designed for superintendent/competent person working in construction operations. However, it is also valuable for quality assurance teams, safety officers, compliance managers, and supervisors who need to verify that construction standards are being met. Organizations of all sizes can benefit from using this Construction Concrete Formwork Inspection Checklist to maintain consistency and accountability.

Browse More Checklists

POPProbe