Manufacturing ESD Protected Area Audit Checklist
Comprehensive ESD protected area audit checklist.
- Industry: Manufacturing
- Frequency: Weekly/Monthly
- Estimated Time: 20-30 minutes
- Role: ESD Coordinator
- Total Items: 24
- Compliance: ANSI/ESD S20.20, IEC 61340
Grounding
Ground points
- Ground points verified?
- Equipment grounded?
Personnel Grounding
Wrist straps/footwear
- Wrist straps worn correctly?
- Wrist straps tested daily?
- ESD footwear tested (if used)?
Work Surfaces
ESD surfaces
- ESD mats properly grounded?
- ESD flooring tested?
Packaging/Handling
ESD packaging
- ESD-safe packaging used?
Machine Guarding
OSHA 1910 Subpart O
- Machine guards in place?
- E-stop buttons tested?
- Safety interlocks functional?
- Light curtains operational?
Chemical Safety
OSHA 1910.1200 HazCom
- SDS sheets available?
- Containers labeled?
- Secondary containment?
Ergonomics
Ergonomic assessment
- Workstation heights OK?
- Lifting aids available?
- Anti-fatigue mats present?
Quality Control
Product quality
- Tools calibrated?
- Defect rate acceptable?
- First article approved?
Environmental Controls
Ventilation and monitoring
- Ventilation operating?
- Noise within limits?
- Lighting adequate?
Related Manufacturing Checklists
- Manufacturing Heat Treatment Process Verification Checklist
- Manufacturing CNC Machine Setup Verification Checklist
- Manufacturing Plating Coating Inspection Checklist
- Manufacturing Welding WPS Verification Checklist
- Manufacturing Fall Protection Equipment Inspection Checklist
- Manufacturing Final Inspection Checklist
- Manufacturing First Article Inspection FAI Checklist
- Manufacturing Fixture Verification Checklist