Manufacturing In-Process Inspection Checklist
Comprehensive in-process inspection checklist for manufacturing quality control.
- Industry: Manufacturing
- Frequency: Per operation/batch
- Estimated Time: 10-20 minutes
- Role: Quality Inspector/Operator
- Total Items: 22
- Compliance: ISO 9001, Company Quality Plan
Setup Verification
First piece
- First piece inspection completed and approved?
- Work instructions available and current?
Dimensional Inspection
Measurements
- Critical dimensions checked?
- Dimensions within tolerance?
Visual/Workmanship
Visual quality
- Workmanship meets standards?
- No visible defects?
Machine Guarding
OSHA 1910 Subpart O
- Machine guards in place?
- E-stop buttons tested?
- Safety interlocks functional?
- Light curtains operational?
Chemical Safety
OSHA 1910.1200 HazCom
- SDS sheets available?
- Containers labeled?
- Secondary containment?
Ergonomics
Ergonomic assessment
- Workstation heights OK?
- Lifting aids available?
- Anti-fatigue mats present?
Quality Control
Product quality
- Tools calibrated?
- Defect rate acceptable?
- First article approved?
Environmental Controls
Ventilation and monitoring
- Ventilation operating?
- Noise within limits?
- Lighting adequate?
Related Manufacturing Checklists
- Manufacturing Inventory Cycle Count Checklist
- Manufacturing Layered Process Audit LPA Checklist
- Manufacturing Management Review Meeting Checklist
- Manufacturing Material Traceability Verification Checklist
- Manufacturing Kaizen Event Completion Audit Checklist
- Manufacturing Kanban System Audit Checklist
- Manufacturing Laser Safety Inspection Checklist
- Manufacturing Lathe Safety Inspection Checklist
Related Quality Management Checklists
- IATF 16949 Process Audit - FREE Download
- Six Sigma Control Plan Audit - FREE Download
- SPC Control Chart Audit - FREE Download
- First Article Inspection (FAI) Checklist - FREE Download
- Calibration System Audit - FREE Download
- MSA Gage R&R Study Checklist - FREE Download
- Process FMEA Review Checklist - FREE Download
- Design FMEA Review Checklist - FREE Download
- Poka-Yoke Device Verification - FREE Download
- Layered Process Audit (LPA) - FREE Download
Why Use This Manufacturing In-Process Inspection Checklist?
This manufacturing in-process inspection checklist helps manufacturing teams maintain compliance and operational excellence. Designed for quality inspector/operator professionals, this checklist covers 22 critical inspection points across 8 sections. Recommended frequency: per operation/batch.
Ensures compliance with ISO 9001, Company Quality Plan. Regulatory-aligned for audit readiness and inspection documentation.
Frequently Asked Questions
What does the Manufacturing In-Process Inspection Checklist cover?
This checklist covers 22 inspection items across 8 sections: Setup Verification, Dimensional Inspection, Visual/Workmanship, Machine Guarding, Chemical Safety, Ergonomics, Quality Control, Environmental Controls. It is designed for manufacturing operations and compliance.
How often should this checklist be completed?
This checklist should be completed per operation/batch. Each completion takes approximately 10-20 minutes.
Who should use this Manufacturing In-Process Inspection Checklist?
This checklist is designed for Quality Inspector/Operator professionals in the manufacturing industry. It can be used for self-assessments, team audits, and regulatory compliance documentation.
Can I download this checklist as a PDF?
Yes, this checklist is available as a free PDF download. You can also use it digitally in the POPProbe mobile app for real-time data capture, photo documentation, and automatic reporting.