Construction Aerial Lift Daily Inspection Checklist

Comprehensive aerial lift daily inspection checklist for boom lifts, scissor lifts, and other elevated work platforms.

  • Industry: Construction
  • Frequency: Daily/Before each use
  • Estimated Time: 10-15 minutes
  • Role: Operator/Inspector
  • Total Items: 32
  • Compliance: OSHA 1926.453, ANSI A92.2-A92.6, Manufacturer Guidelines

Visual Inspection

Overall condition

  • No visible structural damage?
  • No hydraulic or fuel leaks?
  • Tires in good condition and properly inflated?

Platform/Guardrails

Work platform

  • Guardrails secure and in place?
  • Entry gates/chains working?
  • Platform floor clean and non-slip?

Controls

Operating controls

  • Ground controls functioning?
  • Platform controls functioning?
  • Emergency stop working?
  • Horn working?

Functional Test

Operation test

  • Platform raises/lowers smoothly?
  • Drive and steering function properly?
  • Stabilizers/outriggers functional (if equipped)?

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

  • Inspector Name
  • Inspection Date
  • Project Name / Job Number
  • Current Weather Conditions
  • Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

  • Site safety plan posted and accessible?
  • All required permits current and displayed?
  • SDS/MSDS sheets available for all chemicals on site?
  • First aid supplies accessible and stocked?
  • Emergency contact information posted?

Personal Protective Equipment (PPE)

Verify all personnel have and are using appropriate PPE

  • Hard hats worn by all personnel?
  • Safety glasses/eye protection in use?
  • High-visibility vests worn where required?
  • Steel-toe/safety footwear worn?
  • PPE in good condition (no damage)?

Site Conditions & Housekeeping

General site conditions and housekeeping standards

  • Walkways and access routes clear of debris?
  • Adequate lighting in all work areas?
  • Trip hazards identified and addressed?
  • Waste properly contained and removed?

Related Construction Checklists

Related Equipment Safety Checklists

Browse More Checklists