Construction Ladder Daily Inspection Checklist

Comprehensive ladder daily inspection checklist covering OSHA requirements for portable and fixed ladders on construction sites.

Industry: Construction
Frequency: Daily/Before each use
Estimated Time: 5-10 minutes
Role: Construction Worker/Foreman
Total Items: 30
Compliance: OSHA 1926.1053, ANSI A14.1-14.5, Manufacturer Guidelines

Side Rails

Rail condition

Side rails straight (no bends)?
No cracks or breaks in rails?
No excessive corrosion?

Rungs/Steps

Rungs condition

All rungs secure and tight?
No damaged or missing rungs?
Non-slip surfaces intact?

Feet/Base

Foot condition

All safety feet present?
Feet in good condition?

Hardware

Mechanical parts

Spreaders lock properly (step ladder)?
Extension locks work properly?
Rope and pulley functional (extension)?

Pre-Inspection Setup & Documentation

Initial documentation and site preparation verification

Inspector Name
Inspection Date
Project Name / Job Number
Current Weather Conditions
Previous inspection findings reviewed?

Safety & Compliance Verification

Verify compliance with applicable OSHA regulations and site safety plan

Site safety plan posted and accessible?
All required permits current and displayed?
SDS/MSDS sheets available for all chemicals on site?
First aid supplies accessible and stocked?
Emergency contact information posted?

Personal Protective Equipment (PPE)

Verify all personnel have and are using appropriate PPE

Hard hats worn by all personnel?
Safety glasses/eye protection in use?
High-visibility vests worn where required?
Steel-toe/safety footwear worn?
PPE in good condition (no damage)?

Site Conditions & Housekeeping

General site conditions and housekeeping standards

Walkways and access routes clear of debris?
Adequate lighting in all work areas?
Trip hazards identified and addressed?
Waste properly contained and removed?

Related Construction Checklists

Related Fall Protection Checklists

Browse More Checklists